Can someone explain how I can create an MMC from opposing points? There is not enough area on the feature to measure a line or plane. It is an outside feature (extruded tab). Thanks
1. Dimension the point-to-point distance per my print
2. Assign a variable MMC minus the above distance dimension.meas (ASSIGN/V1=0.355-DIST1.MEAS)
3. Create a midpoint
4. Dimension the position of the midpoint and add +V1 to my tolerance
1. Dimension the point-to-point distance per my print
2. Assign a variable MMC minus the above distance dimension.meas (ASSIGN/V1=0.355-DIST1.MEAS)
3. Create a midpoint
4. Dimension the position of the midpoint and add +V1 to my tolerance
