version 2023.2
I have tried everything I can think of to fix the problem but nothing works. This is just one example but it's pretty much the entire dimension results. Will not update. All dimensions are at the end of the program. I've used print command, executed from all constructed features through the final alignment and dimensioning, closed, shutdown, restarted, created new features, FCF's. Anyone else have this issue?
CIR101 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<105,-3274,16>,<0,0,1>,27
ACTL/<104.967,-3274.026,16.066>,<-0.0003519,-0.0000262,0.9999999>,26.974
TARG/<105,-3274,16>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR135 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<1189,-3274,16>,<0,0,1>,27
ACTL/<1188.948,-3273.917,16.089>,<0.0000199,-0.0000303,1>,26.991
TARG/<1189,-3274,16>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
BALOON 13.1-15.2 =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
FEATURE_MATH=DEFAULT,DATUM_MATH=DEFAULT,DISPLAY_CO ORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=27,UPPER TOLERANCE=0.13,LOWER TOLERANCE=0,
REPORT_LOCAL_SIZE=OFF,
CIR101:
UAME SIZE:27.000,
CIR135:
UAME SIZE:26.971,
SEGMENT_1,POSITION,DIAMETER,1.5,MMC,E,B,__,D,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
CIR101:0.057,
CIR135:0.150,
SEGMENT_2,POSITION,COMPOSITE,DIAMETER,0.5,MMC,E,<d at>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
CIR101:0.044,
CIR135:0.044,
ADD
FEATURES/CIR101,CIR135,,
