Export generic .txt not showing all dimensions. PC-DMIS 2022.1

seeker 7 months ago

Hi, im using PC-DMIS 2022.1 SP4. Generating generic txt file with dimensions only shows simple dimensions like distances. Dimensions like positions, that have from with it are not showed when i export them with export -> generic -> txt. Why ?

Parents

0 Zafra 6 months ago

I ran into this issue as well whenever we upgraded to 2023 from 2017. Workaround I started using is create a generic feature to pull in the GD&T values from the Geotol callout. Example

           MOVE/CLEARPLANE
PLANE1       =FEAT/CONTACT/PLANE/DEFAULT,POLAR,NONE,LEAST_SQR
              THEO/<0,0,-0.0547>,<0,0,1>
              ACTL/<0,0,-0.0547>,<0,0,1>
              TARG/<0,0,-0.0547>,<0,0,1>
              ANGLE VEC=<0.309017,-0.9510565,0>,RADIAL
              SHOW FEATURE PARAMETERS=NO
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=8,NUMRINGS=1
                SPACER=5.668
                AVOIDANCE MOVE=NO
              SHOW HITS=NO
FLAT1        =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
              DESCRIPTION=OFF,,
              UNITS=IN,OUTPUT=BOTH,ARROWDENSITY=100,
              SEGMENT_1,FLATNESS,0.0004,TOL_ZONE_MATH=DEFAULT,
              TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
                MEASURED:
                  PLANE1:0.0000,
              ADD
              FEATURES/PLANE1,,
F1           =GENERIC/POINT,DEPENDENT,CARTESIAN,$
              NOM/XYZ,<0,0,0>,$
              MEAS/XYZ,<FLAT1.MEAS,0,0>,$
              NOM/IJK,<0,0,1>,$
              MEAS/IJK,<0,0,1>
  DIM LOC1= LOCATION OF POINT F1  UNITS=IN ,$
  GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=STATS  HALF ANGLE=NO
  AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
  X       0.0000     0.0000     0.0004     0.0000     0.0000     0.0000 #---
  END OF DIMENSION LOC1

Reply

0 Zafra 6 months ago

I ran into this issue as well whenever we upgraded to 2023 from 2017. Workaround I started using is create a generic feature to pull in the GD&T values from the Geotol callout. Example

           MOVE/CLEARPLANE
PLANE1       =FEAT/CONTACT/PLANE/DEFAULT,POLAR,NONE,LEAST_SQR
              THEO/<0,0,-0.0547>,<0,0,1>
              ACTL/<0,0,-0.0547>,<0,0,1>
              TARG/<0,0,-0.0547>,<0,0,1>
              ANGLE VEC=<0.309017,-0.9510565,0>,RADIAL
              SHOW FEATURE PARAMETERS=NO
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=8,NUMRINGS=1
                SPACER=5.668
                AVOIDANCE MOVE=NO
              SHOW HITS=NO
FLAT1        =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
              DESCRIPTION=OFF,,
              UNITS=IN,OUTPUT=BOTH,ARROWDENSITY=100,
              SEGMENT_1,FLATNESS,0.0004,TOL_ZONE_MATH=DEFAULT,
              TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
                MEASURED:
                  PLANE1:0.0000,
              ADD
              FEATURES/PLANE1,,
F1           =GENERIC/POINT,DEPENDENT,CARTESIAN,$
              NOM/XYZ,<0,0,0>,$
              MEAS/XYZ,<FLAT1.MEAS,0,0>,$
              NOM/IJK,<0,0,1>,$
              MEAS/IJK,<0,0,1>
  DIM LOC1= LOCATION OF POINT F1  UNITS=IN ,$
  GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=STATS  HALF ANGLE=NO
  AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
  X       0.0000     0.0000     0.0004     0.0000     0.0000     0.0000 #---
  END OF DIMENSION LOC1

Children

No Data