Position to Cast Points at different Radial Distances

Yes, it's the AI translation API, I had messaged the admin about it. On the top right of the webpage, there is that new globe icon, select "Original". It is screwing with the HTML formatting of the OK and Cancel buttons, making them swap, and removing button style.

Original HTML 

<fieldset class="field-list">
	<ul class="field-list">
		<li class="field-item">
			<span class="field-item-input">
				<a href="#" class="internal-link save-form">Ok</a>
				<a href="#" class="internal-link cancel">Cancel</a>
			</span>
		</li>
	</ul>
</fieldset>

<fieldset class="field-list">
	<ul class="field-list">
		<li class="field-item" data-intento-modified="🌐">
			<span class="field-item-input">
				<a href="#" class="internal-link cancel">Ok</a>
			</span>
			<span href="#" class="internal-link save-form">
				<a>Cancel</a>
			</span>
		</li>
	</ul>
</fieldset>

Alternatively you can add these two filters to your Adblocker of choice, if applicable. 

!Block Inten AI Translation API
||inten.to^
||api.inten.to^

oh wow, ok, here's attempt #2, look at that it worked!  Nice!! Good to know WilliamL .  The API was automatically un-bolding my code in the original post as well. quite frustrating.  BOLD+ITALICS, it would work.

TOPPLN_A =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,OUTLINE,LEAST_SQR
THEO/<0,0,0>,<0,0,1>
ACTL/<0,0,0>,<0,0,1>
TARG/<0,0,0>,<0,0,1>
ANGLE VEC=<1,0,0>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

A3 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,TOPPLN_A
ALIGNMENT/END

ID =FEAT/CONTACT/CIRCLE/DEFAULT,POLAR,OUT,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,2,0
ACTL/<0,0,0>,<0,0,1>,2,0
TARG/<0,0,0>,<0,0,1>
START ANG=0,END ANG=0
ANGLE VEC=<1,0,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/TRANS,XAXIS,ID
ALIGNMENT/TRANS,YAXIS,ID
ALIGNMENT/END

CIR_B1 =FEAT/CONTACT/CIRCLE/DEFAULT,POLAR,OUT,LEAST_SQR
THEO/<3.375,360,0>,<0,0,1>,0.5,0
ACTL/<3.375,0,0>,<0,0,1>,0.5,0
TARG/<3.375,360,0>,<0,0,1>
START ANG=0,END ANG=180
ANGLE VEC=<0,1,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

B1_TARGET =GENERIC/POINT,DEPENDENT,POLAR,$
NOM/XYZ,<3.625,360,0>,$
MEAS/XYZ,<CIR_B1.PR+CIR_B1.R,CIR_B1.PA,0>,$
NOM/IJK,<1,0,0>,$
MEAS/IJK,<1,0,0>

CIR_B2_BOTTOM=FEAT/CONTACT/CIRCLE/DEFAULT,POLAR,OUT,LEAST_SQR
THEO/<3.25,120,0>,<0,0,1>,0.5,0
ACTL/<3.25,120,0>,<0,0,1>,0.5,0
TARG/<3.25,120,0>,<0,0,1>
START ANG=30,END ANG=210
ANGLE VEC=<-1,0,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

B2_TARGET =GENERIC/POINT,DEPENDENT,POLAR,$
NOM/XYZ,<3.5,120,0>,$
MEAS/XYZ,<CIR_B2_BOTTOM.PR+CIR_B2_BOTTOM.R,CIR_B2_BOTTOM.PA,0>,$
NOM/IJK,<1,0,0>,$
MEAS/IJK,<1,0,0>

CIR_B2_RIGHT=FEAT/CONTACT/CIRCLE/DEFAULT,POLAR,OUT,LEAST_SQR
THEO/<3.125,240,0>,<0,0,1>,0.5,0
ACTL/<3.125,240,0>,<0,0,1>,0.5,0
TARG/<3.125,240,0>,<0,0,1>
START ANG=-30,END ANG=150
ANGLE VEC=<1,0,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

B2_RIGHT_TARGET=GENERIC/POINT,DEPENDENT,POLAR,$
NOM/XYZ,<3.375,240,0>,$
MEAS/XYZ,<CIR_B2_RIGHT.PR+CIR_B2_RIGHT.R,CIR_B2_RIGHT.PA,0>,$
NOM/IJK,<1,0,0>,$
MEAS/IJK,<1,0,0>

B1_WITHBASIC=GENERIC/POINT,DEPENDENT,POLAR,$
NOM/XYZ,<B1_TARGET.TPR-0.25,B1_TARGET.TPA,0>,$
MEAS/XYZ,<B1_TARGET.PR-0.25,B1_TARGET.PA,0>,$
NOM/IJK,<0,-1,0>,$
MEAS/IJK,<0,-1,0>

B2_WITHBASIC=GENERIC/POINT,DEPENDENT,POLAR,$
NOM/XYZ,<B2_TARGET.TPR-0.125,B2_TARGET.TPA,0>,$
MEAS/XYZ,<B2_TARGET.PR-0.125,B2_TARGET.PA,0>,$
NOM/IJK,<0,-1,0>,$
MEAS/IJK,<0,-1,0>

CIR_B2 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,YES
THEO/<0,0,0>,<0,0,1>,6.75
ACTL/<0,0,0>,<0,0,1>,6.75
CONSTR/CIRCLE,BF,2D,B1_WITHBASIC,B2_WITHBASIC,B2_RIGHT_TARGET,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0

A4 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/TRANS,XAXIS,CIR_B2
ALIGNMENT/TRANS,YAXIS,CIR_B2
ALIGNMENT/END

F_DIA=FEAT/CONTACT/CIRCLE/DEFAULT,POLAR,OUT,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,6,0
ACTL/<0,0,0>,<0,0,1>,6,0
TARG/<0,0,0>,<0,0,1>
START ANG=0,END ANG=0
ANGLE VEC=<1,0,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO

Let me give this a shot, thank you.

Your method worked perfectly, thank you so much. We can use this approach for many part numbers that have this type of callout. It really feels good to know that your results are accurate and the way the drawing intended.

Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!