Can anyone in here direct me to where is shows that the Infinite 2.0 can be used in a un contolled temperature enviorment ? Is there any limits on the temperature ?
AND, keep in mind, those are SALESMEN's numbers as opposed to REAL WORLD numbers. In other words, those are the BEST CASE SCENARIOS they were able to get, not the real world actualities.
Actually they are B89.4.22 numbers. These values are detemined using B89.4.22 measurement methods which dictate arm ariculations over while measuring a known length standard. Articulating the arm increases the VOLUME on an articulated arm. Less articulations means more accurate. If articulated less THEN the numbers would be BEST CASE SCENARIO but not real world. This is a manual machine so being smart about the articulations can insure highest level of accuracy. With a DCC CMM you wouldn't unneccesarily drive around the part for no reason as that too would add to the machine uncertainty.
AND, keep in mind, those are SALESMEN's numbers as opposed to REAL WORLD numbers. In other words, those are the BEST CASE SCENARIOS they were able to get, not the real world actualities.
Actually they are B89.4.22 numbers. These values are detemined using B89.4.22 measurement methods which dictate arm ariculations over while measuring a known length standard. Articulating the arm increases the VOLUME on an articulated arm. Less articulations means more accurate. If articulated less THEN the numbers would be BEST CASE SCENARIO but not real world. This is a manual machine so being smart about the articulations can insure highest level of accuracy. With a DCC CMM you wouldn't unneccesarily drive around the part for no reason as that too would add to the machine uncertainty.
