Anytime i try to program a single point circle PC-DIMIS gives me an error saying "Hit 1 out of range". I have tried programing with different probe diameters, planes, and workplanes, still get the same error every time. What am I doing wrong?
Any help would be much apprectiated.
PC-DIMIS CAD Version 2012 (Release)
32 Bit Build # 513/pcdimis2012 [jun 29 2012]
Tried creating a 1 hit circle with the correct reference plane called up and I still get the Hit 1 out of range error. Not only that, it looks like it's trying to take the hit somewhere else on the CAD and flipping my axes. See images below.
Ok, didn't realize those would come out so small. The hit point(red arrow) is on the OD of the Cylinder on the left side of the part, and the hole I'm trying to measure is a bolt hole beside the cylinder in the square face(blue arrow)
Tried creating a 1 hit circle with the correct reference plane called up and I still get the Hit 1 out of range error. Not only that, it looks like it's trying to take the hit somewhere else on the CAD and flipping my axes. See images below.
Ok, didn't realize those would come out so small. The hit point(red arrow) is on the OD of the Cylinder on the left side of the part, and the hole I'm trying to measure is a bolt hole beside the cylinder in the square face(blue arrow)
