I am attempting to use quick start to create an alignment, but when I execute the features, they are floating in space as if they are mirrored to the CAD model. I have attempted numerous times with the same results. What could cause this to happen?
My best guess, without even seeing the part, is you have a plane in your rotation. This can cause this "mirroring" error.
If that's not it, please post some code of your alignment.
Brian
I never heard of this error this is good to know I don't use planes a lot for rotation but in some cases I do. I was just programming a part where I was having a issue with the paste and pattern where a plane for rotation is being used, I'll have to check it out. Thanks
My best guess, without even seeing the part, is you have a plane in your rotation. This can cause this "mirroring" error.
If that's not it, please post some code of your alignment.
Brian
I never heard of this error this is good to know I don't use planes a lot for rotation but in some cases I do. I was just programming a part where I was having a issue with the paste and pattern where a plane for rotation is being used, I'll have to check it out. Thanks
