hexagon logo
Register Sign in
  • Replies 8 replies
  • Subscribers 31 subscribers
  • Views 100 views
  • Users 0 members are here
Options
Related

x axis error

Mystic_Muffin
Hey, friends;

I'm having an issue with a romer job. I'm doing an iterative alignment: origin to one hole, align to a second hole, plane off the sample hits from the two circles and a 3rd vector point off the base.

When I'm done running the alignment, I get a popup that says 'x alignment error' and gives me a deviation in the x axis... I'm totally bamboozled.

I've attached a picture of the base and a picture of the error code if anyone has time to give me a hand <3






Attached Files
Parents
  • I am planning in the x, yes. My workplane is update to reflect that. 


    startup    =alignment/start,recall:use_part_setup,list=yes
            alignment/end
            mode/manual
            workplane/xminus
            format/text,options, ,headings,symbols, ;nom,meas,tol,dev,outtol, ,
            loadprobe/3mm_(7512-5385)
            tip/tip1, shankijk=0, 0, 1, angle=0
            point autotrigger/on, on, 2.54
xxxx1      =feat/contact/circle/default,cartesian,in,least_sqr
            theo/<2510.771,656.358,1687.35>,<-0.9549827,0.2966614,0>,8.4
            actl/<721.471,291.465,-9.464>,<-0.0004934,-0.0008894,0.9999995>,8.974
            targ/<2510.771,656.358,1687.35>,<-0.9549827,0.2966614,0>
            start ang=0,end ang=360
            angle vec=<0,0,1>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=4,depth=1,pitch=0
              sample method=sample_hits
              sample hits=3,spacer=10
              find hole=disabled,onerror=no,read pos=no
            show hits=no
dim loc1= location of circle xxxx1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2510.771    721.501      2.000      2.000  -1789.270   1787.270 <--------
y      656.358    291.365      2.000      2.000   -364.993    362.993 <--------
z     1687.350     -9.465      2.000      2.000  -1696.815   1694.815 <--------
d        8.400      8.886      2.000      2.000      0.486      0.000 -----#---
end of dimension loc1
xxxx2      =feat/contact/circle/default,cartesian,in,least_sqr
            theo/<2509.683,652.857,1077.761>,<-0.9549827,0.2966614,0>,8.4
            actl/<715.626,-317.84,-9.871>,<0.000177,-0.0008788,0.9999996>,8.886
            targ/<2509.683,652.857,1077.761>,<-0.9549827,0.2966614,0>
            start ang=0,end ang=360
            angle vec=<0,0,1>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=4,depth=1,pitch=0
              sample method=sample_hits
              sample hits=3,spacer=10
              find hole=disabled,onerror=no,read pos=no
            show hits=no
dim loc2= location of circle xxxx2  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2509.683    715.626      2.000      2.000  -1794.057   1792.057 <--------
y      652.857   -317.834      2.000      2.000   -970.690    968.690 <--------
z     1077.761     -9.872      2.000      2.000  -1087.633   1085.633 <--------
d        8.400      8.849      2.000      2.000      0.449      0.000 -----#---
end of dimension loc2
planepnt1  =feat/contact/vector point/default,cartesian
            theo/<2464.936,508.811,1380.322>,<-0.9549827,0.2966614,0>
            actl/<871.162,-17.937,-9.708>,<0.0002403,-0.0006703,0.9999997>
            targ/<2464.936,508.811,1380.322>,<-0.9549827,0.2966614,0>
            show feature parameters=no
            show contact parameters=yes
            show hits=no
dim loc3= location of point planepnt1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2464.936    873.550      0.500      0.500  -1591.386   1590.886 <--------
y      508.811    -18.734      0.500      0.500   -527.545    527.045 <--------
z     1380.322     -9.597      0.500      0.500  -1389.919   1389.419 <--------
t        0.000   1363.244      0.500      0.500   1363.244   1362.744 -------->
end of dimension loc3
a1         =alignment/start,recall:use_part_setup,list=yes
              alignment/iterate
                pnt target rad=5,start label=,fixture tol=0,error label=
                meas all feat=once,level axis=xaxis,rotate axis=yaxis,origin axis=zaxis
              level=xxxx1,xxxx2,planepnt1,,
              rotate=xxxx1,xxxx2,,
              origin=xxxx1,,
              alignment/trans,xaxis,xxxx1
              alignment/trans_offset,xaxis,-2510.771
              alignment/trans,yaxis,xxxx1
              alignment/trans_offset,yaxis,-656.358
              alignment/trans,zaxis,xxxx1
              alignment/trans_offset,zaxis,-1687.35
            alignment/end
dim loc4= location of circle xxxx1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2510.771   2510.771      2.000      2.000      0.000      0.000 ----#----
y      656.358    656.358      2.000      2.000      0.000      0.000 ----#----
z     1687.350   1687.350      2.000      2.000      0.000      0.000 ----#----
d        8.400      8.974      2.000      2.000      0.574      0.000 -----#---
end of dimension loc4
dim loc5= location of circle xxxx2  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2509.683   2509.683      2.000      2.000      0.000      0.000 ----#----
y      652.857    652.857      2.000      2.000      0.000      0.000 ----#----
z     1077.761   1078.027      2.000      2.000      0.266      0.000 -----#---
d        8.400      8.886      2.000      2.000      0.486      0.000 -----#---
end of dimension loc5
dim loc6= location of point planepnt1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2464.936   2464.936      2.000      2.000      0.000      0.000 ----#----
y      508.811    508.811      2.000      2.000      0.000      0.000 ----#----
z     1380.322   1380.322      2.000      2.000      0.000      0.000 ----#----
t        0.000      0.000      2.000      2.000      0.000      0.000 ----#----
end of dimension loc6
Reply
  • I am planning in the x, yes. My workplane is update to reflect that. 


    startup    =alignment/start,recall:use_part_setup,list=yes
            alignment/end
            mode/manual
            workplane/xminus
            format/text,options, ,headings,symbols, ;nom,meas,tol,dev,outtol, ,
            loadprobe/3mm_(7512-5385)
            tip/tip1, shankijk=0, 0, 1, angle=0
            point autotrigger/on, on, 2.54
xxxx1      =feat/contact/circle/default,cartesian,in,least_sqr
            theo/<2510.771,656.358,1687.35>,<-0.9549827,0.2966614,0>,8.4
            actl/<721.471,291.465,-9.464>,<-0.0004934,-0.0008894,0.9999995>,8.974
            targ/<2510.771,656.358,1687.35>,<-0.9549827,0.2966614,0>
            start ang=0,end ang=360
            angle vec=<0,0,1>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=4,depth=1,pitch=0
              sample method=sample_hits
              sample hits=3,spacer=10
              find hole=disabled,onerror=no,read pos=no
            show hits=no
dim loc1= location of circle xxxx1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2510.771    721.501      2.000      2.000  -1789.270   1787.270 <--------
y      656.358    291.365      2.000      2.000   -364.993    362.993 <--------
z     1687.350     -9.465      2.000      2.000  -1696.815   1694.815 <--------
d        8.400      8.886      2.000      2.000      0.486      0.000 -----#---
end of dimension loc1
xxxx2      =feat/contact/circle/default,cartesian,in,least_sqr
            theo/<2509.683,652.857,1077.761>,<-0.9549827,0.2966614,0>,8.4
            actl/<715.626,-317.84,-9.871>,<0.000177,-0.0008788,0.9999996>,8.886
            targ/<2509.683,652.857,1077.761>,<-0.9549827,0.2966614,0>
            start ang=0,end ang=360
            angle vec=<0,0,1>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=4,depth=1,pitch=0
              sample method=sample_hits
              sample hits=3,spacer=10
              find hole=disabled,onerror=no,read pos=no
            show hits=no
dim loc2= location of circle xxxx2  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2509.683    715.626      2.000      2.000  -1794.057   1792.057 <--------
y      652.857   -317.834      2.000      2.000   -970.690    968.690 <--------
z     1077.761     -9.872      2.000      2.000  -1087.633   1085.633 <--------
d        8.400      8.849      2.000      2.000      0.449      0.000 -----#---
end of dimension loc2
planepnt1  =feat/contact/vector point/default,cartesian
            theo/<2464.936,508.811,1380.322>,<-0.9549827,0.2966614,0>
            actl/<871.162,-17.937,-9.708>,<0.0002403,-0.0006703,0.9999997>
            targ/<2464.936,508.811,1380.322>,<-0.9549827,0.2966614,0>
            show feature parameters=no
            show contact parameters=yes
            show hits=no
dim loc3= location of point planepnt1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2464.936    873.550      0.500      0.500  -1591.386   1590.886 <--------
y      508.811    -18.734      0.500      0.500   -527.545    527.045 <--------
z     1380.322     -9.597      0.500      0.500  -1389.919   1389.419 <--------
t        0.000   1363.244      0.500      0.500   1363.244   1362.744 -------->
end of dimension loc3
a1         =alignment/start,recall:use_part_setup,list=yes
              alignment/iterate
                pnt target rad=5,start label=,fixture tol=0,error label=
                meas all feat=once,level axis=xaxis,rotate axis=yaxis,origin axis=zaxis
              level=xxxx1,xxxx2,planepnt1,,
              rotate=xxxx1,xxxx2,,
              origin=xxxx1,,
              alignment/trans,xaxis,xxxx1
              alignment/trans_offset,xaxis,-2510.771
              alignment/trans,yaxis,xxxx1
              alignment/trans_offset,yaxis,-656.358
              alignment/trans,zaxis,xxxx1
              alignment/trans_offset,zaxis,-1687.35
            alignment/end
dim loc4= location of circle xxxx1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2510.771   2510.771      2.000      2.000      0.000      0.000 ----#----
y      656.358    656.358      2.000      2.000      0.000      0.000 ----#----
z     1687.350   1687.350      2.000      2.000      0.000      0.000 ----#----
d        8.400      8.974      2.000      2.000      0.574      0.000 -----#---
end of dimension loc4
dim loc5= location of circle xxxx2  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2509.683   2509.683      2.000      2.000      0.000      0.000 ----#----
y      652.857    652.857      2.000      2.000      0.000      0.000 ----#----
z     1077.761   1078.027      2.000      2.000      0.266      0.000 -----#---
d        8.400      8.886      2.000      2.000      0.486      0.000 -----#---
end of dimension loc5
dim loc6= location of point planepnt1  units=mm ,$
graph=off  text=off  mult=10.00  output=both  half angle=no
ax    nominal       meas       +tol       -tol        dev     outtol
x     2464.936   2464.936      2.000      2.000      0.000      0.000 ----#----
y      508.811    508.811      2.000      2.000      0.000      0.000 ----#----
z     1380.322   1380.322      2.000      2.000      0.000      0.000 ----#----
t        0.000      0.000      2.000      2.000      0.000      0.000 ----#----
end of dimension loc6
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement