hexagon logo
Register Sign in
  • Replies 24 replies
  • Subscribers 33 subscribers
  • Views 371 views
  • Users 0 members are here
Options
Related

PC-DMIS won't create an auto-circle

jasonsfunderburk
I have created a plane (1) and am attempting to create an auto-circle for a hole on that plane which is .098" in diameter. My probe is 3mm. So while yes, I understand the error message (Sizes for a contact feature should be greater than probe diameter.) I should be able to create a 1 point circle on that plane and have done this successfully in the past many many times. Any ideas what might be going on here?

And sorry, running 2017 R2 sp6... that recently updated... wonder if thats what is causing this to not work all the sudden.
Parents
  • Yes, for the romer... the steel probe is 15mm. And no, its not a menu thing. I can get all the parameters set and hit go... have been doing this for years... and suddenly can't thus thinking the update may have "fixed" this issue.

    As far as I know there are no options for auto-features from the quick start menu. unless we're talking about different menu's.
Reply
  • Yes, for the romer... the steel probe is 15mm. And no, its not a menu thing. I can get all the parameters set and hit go... have been doing this for years... and suddenly can't thus thinking the update may have "fixed" this issue.

    As far as I know there are no options for auto-features from the quick start menu. unless we're talking about different menu's.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement