Is there a way to fix the model in place in the graphics window? In my years on the CMM I have always incorporated viewsets and screenshots and things into my programs, both to help the operator and just to give a certain presentation. I'm finding that all of that goes in the crapper when I run a Romer program and the model starts moving around on the screen. I can see where this would be useful for an exceptionally large part, but for most cases I would prefer that the model stay in one place and not zoom in and out randomly as I'm running.
I've tried almost everything on the Romer to get the cad to quit spinning & zooming. The ONLY thing I have found that works is to make a double (over & under) view (view setup). The bottom view will not spin and zoom, so I then push the divider up as far as possible to give me the biggest view.
Other than that, I've found nothing that will work.
I've tried almost everything on the Romer to get the cad to quit spinning & zooming. The ONLY thing I have found that works is to make a double (over & under) view (view setup). The bottom view will not spin and zoom, so I then push the divider up as far as possible to give me the biggest view.
Other than that, I've found nothing that will work.