I'm new at using CAD models and am having trouble getting my measured features to line up with the CAD iges File I am importing. When I bring the CAD model in, it takes the origin of the CAD model to the origin of the Romer. When I measure the actual part, all my measurements are off in space in the initial alignment compared to the CAD model. After I do the first manual alignment, Plan/Line/Point, and level and rotate and origin what do I do next? I tried doing the CTRL+F4 and making a plane, line, and point on the part, then rehitting and aligning again. This just put my new features off to the side with the other. What am I doing wrong? Please help! lol.
The thread explains everything in great detail. Thanks, I wouldn't have found it. The only problem is, I don't have that F5 Part/Setup tab for aligning your CAD model to the machine. Would you know how to get that tab. Our DCC machines have it, but my Romer Arm doesn't. Thanks VinniUSMC!
The thread explains everything in great detail. Thanks, I wouldn't have found it. The only problem is, I don't have that F5 Part/Setup tab for aligning your CAD model to the machine. Would you know how to get that tab. Our DCC machines have it, but my Romer Arm doesn't. Thanks VinniUSMC!