Can a hole axis be create and recognized as T value in CAD. The part has a hole that is smaller than any probe tip I have available. I would like to be able to place probe at surface of the hole and wall and recognize the hole axis real time in T (CAD). I have 2016 CAD++ SP7. Thanks in advance.
Enable the DRO window and right click on it to display some of the options you can use. Other than that, hold the probe against the surface the hole is in and look at the smaller DRO in the lower right corner of the PC-DMIS window. Might not give you the T-value per se, though.
Enable the DRO window and right click on it to display some of the options you can use. Other than that, hold the probe against the surface the hole is in and look at the smaller DRO in the lower right corner of the PC-DMIS window. Might not give you the T-value per se, though.
