hexagon logo
Register Sign in
  • Replies 12 replies
  • Subscribers 31 subscribers
  • Views 1075 views
  • Users 0 members are here
Options
Related

Comparing two COPs of the same part

NAhmed
Hello,

We use our arm for measuring parts after test. Right now trying to see if we can compare a scan of a sample taken before test to a scan of the same sample taken after test. Our romer arm and sample fixture don't move so I don't think I need to worry about doing any sort of alignment... yet. Does anybody know if there is a way to do a colormap between two scans instead of between a CAD and a scan?

I tried exporting one of the scans to an IGES and then importing the same IGES to try the scan but nothing showed up.
Parents
  • HI,

    I have a case similar to this.

    We needed to scan a big component and for this, we needed to move the arm.

    We did two COPs and now we trying to do the alignment using the cad file like a reference.

    For aligning one COP with the CAD it's OK.

    But when we try to align the second COP the CAD changes the position.

    See in attached

    thanks
    Attached Files
Reply
  • HI,

    I have a case similar to this.

    We needed to scan a big component and for this, we needed to move the arm.

    We did two COPs and now we trying to do the alignment using the cad file like a reference.

    For aligning one COP with the CAD it's OK.

    But when we try to align the second COP the CAD changes the position.

    See in attached

    thanks
    Attached Files
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement