hexagon logo
Register Sign in
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 49 views
  • Users 0 members are here
Options
Related

Dat_A is a PLN Dat_B is a slot width and Dat_C Is a slot length?

MoRomer81
I am trying to program a part where the datums are datum A is a surface and then datum B and C are the width and length of 2 slots. I have only been programming for just shy of 2 months and can use all the help I can get. Lol. Any suggestions would be greatly appreciated. Thanks.
Parents
  • I assume by "surface" you are referring to a planar feature. Measure the plane. Level to it and set an origin on it.

    I then assume you want to measure a line on each side of width B. Construct a width feature out of it.

    Measure a line on each side of width c, then construct another width feature.

    Assign the plane as datum A. Assign the width features to B and C.

    A copy of the print, or sketch of the datums could help clarify what you are after.
Reply
  • I assume by "surface" you are referring to a planar feature. Measure the plane. Level to it and set an origin on it.

    I then assume you want to measure a line on each side of width B. Construct a width feature out of it.

    Measure a line on each side of width c, then construct another width feature.

    Assign the plane as datum A. Assign the width features to B and C.

    A copy of the print, or sketch of the datums could help clarify what you are after.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement