hexagon logo
Register Sign in
  • Replies 16 replies
  • Subscribers 14 subscribers
  • Views 253 views
  • Users 0 members are here
Options
Related

2011 : focus detection error

JEFMAN
I have 2010MR3 and 2011 on the PC. I can calibrate the CMM-V with no error on 2010MR3. I built the same probe on 2011, and the calibration stop with this kind of message : "Focus detection error in one position".
I have only two choices : retry or cancel. If I retry, it's the same, if I cancel, the probe is not calibrated !!!!!
What can I do ?
(I prefer 2011 for some fixed bugs on tool changer...)Confused
Parents
  • Make sure in Edit/ Preferences/ Rotary table that no rotary table is selected. I have had the happen before and mess things up.

    Rotary table is not selected, I wrote a special constant.dat without rotary table, and I disconnect all the rotary wires... What can i do more ?????

    The W axis appears also on the CMM One, with a FB2 controller, and there were never a rotary on !!!!

    If you use a CMM-Ve, can you add an advice on another tread about having it, please ???

    Thanks
Reply
  • Make sure in Edit/ Preferences/ Rotary table that no rotary table is selected. I have had the happen before and mess things up.

    Rotary table is not selected, I wrote a special constant.dat without rotary table, and I disconnect all the rotary wires... What can i do more ?????

    The W axis appears also on the CMM One, with a FB2 controller, and there were never a rotary on !!!!

    If you use a CMM-Ve, can you add an advice on another tread about having it, please ???

    Thanks
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement