Hi
This may be of use to some one, We have just had the latest version of 2011_MR1 Vision installed to resolve some issue we had, while this was being done we found another problem which I am told is due to us using Legacy Report forms at the end of our programs, the problem is the report takes a very long time to load ( it hangs ).
The work around is when the report finally opens CTRL E and open it in edit mod ( you will see straight away that you have problem as all the pull down menus are missing ) select the blue bar at the top of the page and right click and close the software ( so you have baiclly force the software to close while the report is in edit mod ).
Now restart the sofware open your program and F9 you legacy report and it should open straight away.
Hope this helps some one
