hexagon logo
Register Sign in
  • Replies 2 replies
  • Subscribers 14 subscribers
  • Views 58 views
  • Users 0 members are here
Options
Related

Cannot pick Spline from CAD

czhong
I need to inspect the 2D profile. I have the CAD file (.DXF) and is programing from the CAD.
I cannot pick a section of the profile, because that section is a "spline".
I am using the auto feature (2D profile) function and I can pick up other sections which contain straight line and arc.
Is there anything I can do? Did I miss anything here?

Thanks.
Parents
  • The 2D Profile command in 2013 MR1 Supports splines. In F5 setup, there is an option of using Legacy 2D profile. By default, in a new part program, the new 2D profile is used
    This does work although the filter doesn't do a great job in my experience. If the outlier filter is set to 3, debris is not filtered out. If I work down towards 2, sections of the spline are removed from the profile.
    On Lines and Circles I set the Outlier filter to 2 or 2.2 and it works great.
Reply
  • The 2D Profile command in 2013 MR1 Supports splines. In F5 setup, there is an option of using Legacy 2D profile. By default, in a new part program, the new 2D profile is used
    This does work although the filter doesn't do a great job in my experience. If the outlier filter is set to 3, debris is not filtered out. If I work down towards 2, sections of the spline are removed from the profile.
    On Lines and Circles I set the Outlier filter to 2 or 2.2 and it works great.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement