It was an old bug (2010 or 2011), when you want to calibrate the ring position (with a TTP), it works if you do it by the calibration window, but it doesn't work if you save a set parameter : the CMM goes to the 0 machine, instead of 0 ring... Be carefull of collision on this case !!!!!
I use it in a prog of CMMV calibration.
Hi Tomy,
I can calibrate only from the calibration window, and I 'd never seen this message.
You should check the ring vector, diameter, and the depth of probing.
If you work with a CMM-V, you have first to calibrate the ring with a TTP (tool moved = yes), and in a second time with the camera (tool moved = no).
Hi Tomy,
I can calibrate only from the calibration window, and I 'd never seen this message.
You should check the ring vector, diameter, and the depth of probing.
If you work with a CMM-V, you have first to calibrate the ring with a TTP (tool moved = yes), and in a second time with the camera (tool moved = no).