Hi All,
I am wondering if their is an accurate way and how to do a vision only alignment on the optiv 2Z443?? I am working on some very small medical parts with small features that is why I want to use vision only. I have the part just laying on the table with nothing holding it down due to its size so I can't touch with the probe since it is not secure to the table. Any input is appreciated!
I think you can do it, but I'm not sure of the accuracy !
The only constraint is to do a 3D alignment with a 2D probe. For example, if you have a plane at the top, you have to measure some points with auto focus, and then create the plane.
With 2 holes, you can create a line and a origin on the first hole (i say it in theory, i don't know about your part !).
If you want to estimate the accuracy, you will have to check the flatness, it will give you an idea of what you're measuring...
I think you can do it, but I'm not sure of the accuracy !
The only constraint is to do a 3D alignment with a 2D probe. For example, if you have a plane at the top, you have to measure some points with auto focus, and then create the plane.
With 2 holes, you can create a line and a origin on the first hole (i say it in theory, i don't know about your part !).
If you want to estimate the accuracy, you will have to check the flatness, it will give you an idea of what you're measuring...