hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 14 subscribers
  • Views 152 views
  • Users 0 members are here
Options
Related

How to do Vision only alignment on Optiv 2Z443 multi sensor

BadMofo
Hi All,
I am wondering if their is an accurate way and how to do a vision only alignment on the optiv 2Z443?? I am working on some very small medical parts with small features that is why I want to use vision only. I have the part just laying on the table with nothing holding it down due to its size so I can't touch with the probe since it is not secure to the table. Any input is appreciated!
Parents
  • Hi Adam and Wicked_tatoo !
    Very cool, you're right, 17 pounds, 160 m, and.... X$, with X not very cool !!!!!
    I have the ancester of AT402 with T-probe and T-scan, it's nice to work with it (not PC-DMIS), but I can't get the same accuracy than a MMT, sometimes it's surprising...
    You just have to understand that's not a bridge CMM, and don't forget it during use !!!!
    Another point, with a scanner, you measure a lot of points, and you need to have a "strong" PC to treat measurements...

    Like said Wicked_tatoo "That is not really inline with the vision systems but none the less cool. " !!!
Reply
  • Hi Adam and Wicked_tatoo !
    Very cool, you're right, 17 pounds, 160 m, and.... X$, with X not very cool !!!!!
    I have the ancester of AT402 with T-probe and T-scan, it's nice to work with it (not PC-DMIS), but I can't get the same accuracy than a MMT, sometimes it's surprising...
    You just have to understand that's not a bridge CMM, and don't forget it during use !!!!
    Another point, with a scanner, you measure a lot of points, and you need to have a "strong" PC to treat measurements...

    Like said Wicked_tatoo "That is not really inline with the vision systems but none the less cool. " !!!
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement