I'm new to the PC-DMIS programming and here's my issue.
I have a part programmed and works fine. Now I've added a new fixture to the machine that requires the part to be rotated 45 degrees.
I have tried to adjust my alignment and Yline but it still thinks all my features are at the old position before adding that new fixture. How can I fix this and be able to measure all my parts without having to reprogram?
Its turned from the original position 90 degrees and Im using only the vision for this part. But I've tried many different alignment modification and I cant seem to get it right. It keeps going to where it was before it got rotated.
Just an Fyi, I never had any formal training I had to pick it on my own, this is my second week.
Its turned from the original position 90 degrees and Im using only the vision for this part. But I've tried many different alignment modification and I cant seem to get it right. It keeps going to where it was before it got rotated.
Just an Fyi, I never had any formal training I had to pick it on my own, this is my second week.