Hey guys.
It has been awhile, I hope all is well. I have a rather simple looking problem but I am stumped as to why it is happening.
Usually during programming on Vision I could simple click my points in my live view after selecting Auto Circle. As soon as I would click my 3rd point the search field of view would pop up with all of my parameters and I could change them from there. Now for some reason if I click these points nothing registers and I can just keep clicking and clicking and it adds a bunch of points but doesn't register any actual hit targets and sometimes it will just completely remove all of the points made. I can get AutoCircle to work if I put in X,Y,Z and diameter of course but then I can't manipulate all of my parameters as usual because there are no hit targets. I can get it to find points but I can't take Manual ones using Automatic or Manual Hit Targets they both produce the same issue.
I seemed to run into this once before and when using my Nikon 10X and it seemed like the feature was to small and when I made my hit targets slightly larger it would work. This just started after calibrating and setting up my Nikon 20X. I am wondering if this is some kind of bug with 64bit 2015.1? As I never had an issue before our upgrade when using 2011 MR1.
Any input would be great.
Thanks!