Thank JEFMAN Your alignment A2 is not correct (the origin is defined twice with different values) A1 : to move from 1pcs to other pcs A2 : for looping : define the peak off tooth. temporary loop number =4, if program ok, I will revise to 24 = number of teeth Circ4 should be a constructed circle from PNT1[1..4]. => I revised could you indicate on the picture who are circ1 and circ2 ? => already have in attachment file
Result is same, like picture spur.png
My mission is measure coaxiality of c1 and c2 for all pcs in picture capture.jpg => can you support
Coaxiality or Concentricity?
You should also try to level, rotate origin in your alignment.
