hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 14 subscribers
  • Views 189 views
  • Users 0 members are here
Options
Related

Program gets slower

Thiyagu_Raj
I'm using 2020 r1 Sp6, In which i made a program using Vision probe, but the demon starts going slower. It takes longer time to pull up the dimension windows & some times it hangs. Is anyone facing the same issue ? 

MAN_ROT_LN =FEAT//LINE/DEFAULT,CARTESIAN,UNBOUNDED
THEO/<-3.0009,-1.3096,-0.0805>,<1,0,0>,<0,-1,0>,<0,0,1>,0.298
ACTL/<-0.8081,-4.9575,-14.3517>,<0.9999924,-0.0039007,0>,<-0.0039007,-0.9999924,0>,<0,0,1>,0.2964
TARG/<-3.0009,-1.3096,-0.0805>,<1,0,0>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ROTATE,XPLUS,TO,MAN_ROT_LN,ABOUT,ZPLUS
ALIGNMENT/TRANS,YAXIS,MAN_ROT_LN
ALIGNMENT/TRANS_OFFSET,YAXIS,1.299
ALIGNMENT/END
MAN_XY_SLTR=FEAT//ROUND SLOT/DEFAULT,CARTESIAN,IN
THEO/<0,0.0106,0.4003>,<0,0,1>,<0.9999588,0.009078,0>,0 .2743,0.3403
ACTL/<1.7695,0.0064,-13.8814>,<0,0,1>,<0.9999943,0.0033726,0>,0.2721,0. 3406
TARG/<0,0.0106,0.4003>,<0,0,1>,<0.9999588,0.009078,0>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/TRANS,XAXIS,MAN_XY_SLTR
ALIGNMENT/TRANS,YAXIS,MAN_XY_SLTR
ALIGNMENT/END
MAN_Z_PT =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-0.5,0,0>,<0,0,1>
ACTL/<-0.6778,-0.0392,-14.3191>,<0,0,1>
TARG/<-0.5,0,0>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/TRANS,ZAXIS,MAN_Z_PT
ALIGNMENT/TRANS_OFFSET,ZAXIS,-0.5
ALIGNMENT/END
MODE/DCC
TEMP_ROT_LN=FEAT//LINE/DEFAULT,CARTESIAN,UNBOUNDED
THEO/<-2.5,-1.3096,0.4375>,<1,0,0>,<0,-1,0>,<0,0,1>,0.298
ACTL/<-2.4991,-1.3055,0.4375>,<1,0.000178,0>,<0.000178,-1,0>,<0,0,1>,0.2964
TARG/<-2.5,-1.3096,0.4375>,<1,0,0>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A4 =ALIGNMENT/START,RECALL:A3,LIST=YES
ALIGNMENT/ROTATE,XPLUS,TO,TEMP_ROT_LN,ABOUT,ZPLUS
ALIGNMENT/TRANS,YAXIS,TEMP_ROT_LN
ALIGNMENT/TRANS_OFFSET,YAXIS,1.299
ALIGNMENT/END
TEMP_XY_SLTR=FEAT//ROUND SLOT/DEFAULT,CARTESIAN,IN
THEO/<0,0.0106,0.934>,<0,0,1>,<-1,0,0>,0.273,0.342
ACTL/<0,0.006,0.934>,<0,0,1>,<-0.9999959,-0.00287,0>,0.2722,0.3411
TARG/<0,0.0106,0.934>,<0,0,1>,<-1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A5 =ALIGNMENT/START,RECALL:A4,LIST=YES
ALIGNMENT/TRANS,XAXIS,TEMP_XY_SLTR
ALIGNMENT/TRANS,YAXIS,TEMP_XY_SLTR
ALIGNMENT/END
TEMP_Z_PNT =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-0.5,0,0.5>,<0,0,1>
ACTL/<-0.5,0,0.4911>,<0,0,1>
TARG/<-0.5,0,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A6 =ALIGNMENT/START,RECALL:A5,LIST=YES
ALIGNMENT/TRANS,ZAXIS,TEMP_Z_PNT
ALIGNMENT/TRANS_OFFSET,ZAXIS,-0.5
ALIGNMENT/END
ZP_1 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-2,-1,0.5>,<0,0,1>
ACTL/<-2,-1,0.5117>,<0,0,1>
TARG/<-2,-1,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
ZP_2 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-1,-0.5,0.5>,<0,0,1>
ACTL/<-1,-0.5,0.5012>,<0,0,1>
TARG/<-1,-0.5,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
ZP_3 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<1,0.5,0.5>,<0,0,1>
ACTL/<1,0.5,0.5008>,<0,0,1>
TARG/<1,0.5,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
ZP_4 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<2,1,0.5>,<0,0,1>
ACTL/<2,1,0.5103>,<0,0,1>
TARG/<2,1,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DAT_A =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
THEO/<0,0,0.5>,<0.0469096,-0.0938191,0.9944835>
ACTL/<0,0,0.506>,<0.4472135,-0.8944272,-0.0000221>
CONSTR/PLANE,BF,ZP_1,ZP_2,ZP_3,ZP_4,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
TEMP_ZP_1 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<0,0.175,0.949>,<0,0,1>
ACTL/<0,0.175,0.9451>,<0,0,1>
TARG/<0,0.175,0.949>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A7 =ALIGNMENT/START,RECALL:A6,LIST=YES
ALIGNMENT/TRANS,ZAXIS,TEMP_ZP_1
ALIGNMENT/END
DP_L1 =FEAT//LINE/DEFAULT,CARTESIAN,UNBOUNDED
THEO/<-0.0258,0.1365,-0.015>,<1,0,0>,<0,-1,0>,<0,0,1>,0.0494
ACTL/<-0.0251,0.136,-0.015>,<0.9999963,0.0027306,0>,<0.0027306,-0.9999963,0>,<0,0,1>,0.0477
TARG/<-0.0258,0.1365,-0.015>,<1,0,0>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DP_L2 =FEAT//LINE/DEFAULT,CARTESIAN,UNBOUNDED
THEO/<-0.0277,-0.1365,-0.015>,<1,0,0>,<0,-1,0>,<0,0,1>,0.0497
ACTL/<-0.0267,-0.1364,-0.015>,<0.9999871,0.0050712,0>,<0.0050712,-0.9999871,0>,<0,0,1>,0.048
TARG/<-0.0277,-0.1365,-0.015>,<1,0,0>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DATUM_B =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-0.0268,0,-0.015>,<1,0,0>
ACTL/<-0.0259,-0.0002,-0.015>,<0.9999924,0.0039009,0>
CONSTR/LINE,MID,DP_L1,DP_L2
SLT_CR1 =FEAT//CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<-0.0345,0,-0.015>,<0,0,1>,0.273,107.9847,250.5313
ACTL/<-0.0344,-0.0001,-0.015>,<0,0,1>,0.2721,108.1873,250.3699
TARG/<-0.0345,0,-0.015>,<0,0,1>
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
SLT_CR2 =FEAT//CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0.0345,0,-0.015>,<0,0,1>,0.273,289.4426,71.5836
ACTL/<0.0343,0.0001,-0.015>,<0,0,1>,0.272,289.8037,71.2274
TARG/<0.0345,0,-0.015>,<0,0,1>
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
RECALL/ALIGNMENT,INTERNAL,A6
TEMP_ZP_2 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-2,-1,0.5>,<0,0,1>
ACTL/<-2,-1,0.5119>,<0,0,1>
TARG/<-2,-1,0.5>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A8 =ALIGNMENT/START,RECALL:A6,LIST=YES
ALIGNMENT/TRANS,ZAXIS,TEMP_ZP_2
ALIGNMENT/END
PRF1 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<-2.3927,-0.4345,0>,<0,0,1>
ACTL/<-2.3932,-0.4353,0>,<0,0,1>
TARG/<-2.3927,-0.4345,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
PRF2 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<-0.1601,0.354,-0.015>,<0,0,1>
ACTL/<-0.1613,0.3555,-0.015>,<0,0,1>
TARG/<-0.1601,0.354,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
PRF3 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<2.2942,1.299,-0.015>,<0,0,1>
ACTL/<2.2927,1.3052,-0.015>,<0,0,1>
TARG/<2.2942,1.299,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
TEMP_ZP_3 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<3,0,0.409>,<0,0,1>
ACTL/<3,0,0.436>,<0,0,1>
TARG/<3,0,0.409>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A9 =ALIGNMENT/START,RECALL:A8,LIST=YES
ALIGNMENT/TRANS,ZAXIS,TEMP_ZP_3
ALIGNMENT/END
DP_1 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<3.55,1.299,-0.015>,<0,-1,0>,<0,0,1>
ACTL/<3.55,1.3047,-0.015>,<0,-1,0>,<0,0,1>
TARG/<3.55,1.299,-0.015>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
CP_1 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<4.232,0.6525,-0.015>,<-1,0,0>,<0,0,1>
ACTL/<4.2314,0.6525,-0.015>,<-1,0,0>,<0,0,1>
TARG/<4.232,0.6525,-0.015>,<-1,0,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
CP_2 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<4.232,-0.6525,-0.015>,<-1,0,0>,<0,0,1>
ACTL/<4.2309,-0.6525,-0.015>,<-1,0,0>,<0,0,1>
TARG/<4.232,-0.6525,-0.015>,<-1,0,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DP_2 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<3.55,-1.299,-0.015>,<0,1,0>,<0,0,1>
ACTL/<3.55,-1.2963,-0.015>,<0,1,0>,<0,0,1>
TARG/<3.55,-1.299,-0.015>,<0,1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
TEMP_ZP_4 =FEAT//SURFACE POINT/DEFAULT,CARTESIAN
THEO/<-3,0,0>,<0,0,1>
ACTL/<-3,0,-0.0339>,<0,0,1>
TARG/<-3,0,0>,<0,0,1>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
A10 =ALIGNMENT/START,RECALL:A9,LIST=YES
ALIGNMENT/TRANS,ZAXIS,TEMP_ZP_4
ALIGNMENT/END
PRF4 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<-2.5552,0.3351,-0.015>,<0,0,1>
ACTL/<-2.5516,0.335,-0.015>,<0,0,1>
TARG/<-2.5552,0.3351,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
PRF5 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<-3.815,0.2798,-0.015>,<0,0,1>
ACTL/<-3.8151,0.2783,-0.015>,<0,0,1>
TARG/<-3.815,0.2798,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
RECALL/ALIGNMENT,INTERNAL,A8
PRF6 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<-2.275,-1.299,-0.015>,<0,0,1>
ACTL/<-2.2748,-1.3048,-0.015>,<0,0,1>
TARG/<-2.275,-1.299,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
PRF7 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<0.1601,-0.354,-0.015>,<0,0,1>
ACTL/<0.1629,-0.3545,-0.015>,<0,0,1>
TARG/<0.1601,-0.354,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
PRF8 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<2.4076,0.4173,0>,<0,0,1>
ACTL/<2.408,0.4177,0>,<0,0,1>
TARG/<2.4076,0.4173,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO

  • RECALL/ALIGNMENT,INTERNAL,A9
PRF9 =FEAT//PROFILE 2D/DEFAULT,OPEN,CARTESIAN
THEO/<3.5969,-0.2604,-0.015>,<0,0,1>
ACTL/<3.5951,-0.2605,-0.015>,<0,0,1>
TARG/<3.5969,-0.2604,-0.015>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
RECALL/ALIGNMENT,INTERNAL,A10
DP_3 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<-3.55,1.299,-0.015>,<0,-1,0>,<0,0,1>
ACTL/<-3.55,1.2963,-0.015>,<0,-1,0>,<0,0,1>
TARG/<-3.55,1.299,-0.015>,<0,-1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
CP_3 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<-4.232,0.6525,-0.015>,<1,0,0>,<0,0,1>
ACTL/<-4.2311,0.6525,-0.015>,<1,0,0>,<0,0,1>
TARG/<-4.232,0.6525,-0.015>,<1,0,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
CP_4 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<-4.232,-0.6525,-0.015>,<1,0,0>,<0,0,1>
ACTL/<-4.2318,-0.6525,-0.015>,<1,0,0>,<0,0,1>
TARG/<-4.232,-0.6525,-0.015>,<1,0,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DP_4 =FEAT//EDGE POINT/DEFAULT,CARTESIAN
THEO/<-3.55,-1.299,-0.015>,<0,1,0>,<0,0,1>
ACTL/<-3.55,-1.3047,-0.015>,<0,1,0>,<0,0,1>
TARG/<-3.55,-1.299,-0.015>,<0,1,0>,<0,0,1>
SHOW FEATURE PARAMETERS=NO
SHOW_VISION_PARAMETERS=NO
DL_1 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-3.55,1.299,-0.015>,<1,0,0>
ACTL/<-3.55,1.2963,0.002>,<0.9999993,0.0011867,0>
CONSTR/LINE,BF,2D,DP_3,DP_1,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
DL_2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-3.55,-1.299,-0.015>,<1,0,0>
ACTL/<-3.55,-1.3047,0.002>,<0.9999993,0.0011826,0>
CONSTR/LINE,BF,2D,DP_4,DP_2,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
CL_1 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<4.232,-0.6525,-0.015>,<0,1,0>
ACTL/<4.2309,-0.6525,0.0189>,<0.0003431,0.9999999,0>
CONSTR/LINE,BF,2D,CP_2,CP_1,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
CL_2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-4.232,-0.6525,-0.015>,<0,1,0>
ACTL/<-4.2318,-0.6525,-0.015>,<0.0005352,0.9999999,0>
CONSTR/LINE,BF,2D,CP_4,CP_3,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
DATUM_D =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-3.55,0,-0.015>,<1,0,0>
ACTL/<-3.55,-0.0042,0.002>,<0.9999993,0.0011846,0>
CONSTR/LINE,MID,DL_1,DL_2
DATUM_C =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<0,-0.6525,-0.015>,<0,1,0>
ACTL/<-0.0004,-0.6525,0.002>,<0.0004392,0.9999999,0>
CONSTR/LINE,MID,CL_2,CL_1
RECALL/ALIGNMENT,INTERNAL,A6
DATUM_A =GENERIC/PLANE,DEPENDENT,CARTESIAN,$
NOM/XYZ,<0+0,0+0,0+0>,$
MEAS/XYZ,<0+0,0+0,0+0>,$
NOM/IJK,<0*0,0*0,1*1>,$
MEAS/IJK,<0*0,0*0,1*1>
DATDEF/FEATURE=DATUM_A,A
DISPLAYPRECISION/4
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,MAXMIN,DEV,OUTTOL,
SCN1 =FEAT/SET,CARTESIAN
THEO/<0.0232,0.0086,0.6881>,<0,0,1>
ACTL/<0.023,0.0086,0.7057>,<0,0,1>
CONSTR/SET,BASIC,PRF1,PRF2,PRF3,PRF4,PRF5,PRF6,PRF7,PRF8, PRF9,,
A12 =ALIGNMENT/START,RECALL:A6,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,DATUM_A
ALIGNMENT/ROTATE,YPLUS,TO,DATUM_C,ABOUT,ZPLUS
ALIGNMENT/TRANS,ZAXIS,DATUM_A
ALIGNMENT/TRANS,XAXIS,DATUM_C
ALIGNMENT/TRANS,YAXIS,DATUM_B
ALIGNMENT/END
DIM_1 =LINE PROFILE : SCN1
FEATCTRLFRAME/SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=POSITION,REPORTGRAPH=OFF,TEXT=OFF,MULT=10 .00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
PRIMARY DIMENSION/PROFILE OF LINE,0.01,<UZ>,<UTol>,A,<dat>,<dat>
NOTE/DIM_1
FEATURES/SCN1,,
ANALYSISVIEW/DIM_1,,
  • Have you restarted the software recently? I know I have been having memory leaks in the software in which I need to restart it once a day.
  • When in doubt, close it out! Yeah definitely try a restart. and maybe try copying your features to a fresh program if you are still getting issues
  • in reply to LaserJay
    I already informed to regional hex Tech guy & the response i got was"PC-Dmis, is failing to handle large number of points"
  • in reply to bfire85
    yes, So many times. but still no use.
  • How many points are in your program?
    Maybe your computer processor is too slow for a large program that is calculating a lot of data?
  • How many points are in your program?
    Maybe your computer processor is too slow for a large program that is calculating a lot of data?

    To bank off what LaserJay said, does your computer meet the minimum requirements?

    - PC-DMIS 2020 R1 operates under 64-bit Windows 10, Windows 8.1, Windows 8, and Windows 7.
    - Microsoft .NET Framework 4.6.1 for Windows.
    - 4 GB of RAM or higher
    - 1 GB of video RAM
    - 2 GHZ or higher quad core processor
    - Video Card: GPU Memory 2 GB DDR3, Memory Bandwidth 29.0 GB/s, CUDA Cores 384, Open GL 3.0
    - Make sure you have enough space on your hard drive
  • Due to busy schedule can't come online, Here is my system config.

    The program has around 15k points, the program has 2D Auto profile and the point density is changed to low.


  • Do you have the status window open/visible in PC-DMIS? if yes, try closing it to see if it makes any difference.
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement