- It error occurs strictly when using the camera, since its trying to focus
- The machine errors out when measuring the circles, but I have witnessed its not focusing on points as well...also received the same error
- This seems to be a communication issue on this machine only, a as I have never witnessed this happening on our other OPTIV 663
- I can watch PC-DMIS read the code for the circle, the machine does physically move and then finds the focal spot (the circle is crisp on live view screen) but there is a delay in the software and that's when I know it will fault out...
- I can click the play button multiple times in the execution window to repeat the focus step, and the machine will eventually generate the actuals and continue
- I can watch PC-DMIS read the code for the circle, the machine does physically move and then finds the focal spot (the circle is crisp on live view screen) but there is a delay in the software and that's when I know it will fault out...
- I have tried to change every focus settings possible, increase/decreased range, duration, etc...switched from AUTO to FULL...using assist etc...
- No matter the focus settings, the machine will still fault out during execution eventually...its an intermittent problem
- Perhaps its my edge detection settings or something else?
- No matter the focus settings, the machine will still fault out during execution eventually...its an intermittent problem
- The software we are running is PC-DMIS 2020, on both machine as well.
- I use subroutines in the program, but it will also error out if I don't use subroutines.
Attached Files
