Your Products have been synced, click here to refresh
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, Position stylus at top center of front left hole (level with surface) PNT1 =FEAT/POINT,CARTESIAN THEO/<3.6811,0.7677,0>,<0,0,1> ACTL/<26.6234,19.2428,-78.9025>,<0,0,1> READPOINT/ ALIGN1 =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/TRANS,XAXIS,PNT1 ALIGNMENT/TRANS,YAXIS,PNT1 ALIGNMENT/TRANS,ZAXIS,PNT1 ALIGNMENT/TRANS_OFFSET,XAXIS,-3.6811 ALIGNMENT/TRANS_OFFSET,YAXIS,-0.7677 ALIGNMENT/END MODE/DCC CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<3.6811,0.7677,0>,<0,0,1>,0.5906 ACTL/<3.6745,0.7667,0.0301>,<0,0,1>,0.5955 TARG/<3.6811,0.7677,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<0.7071068,-0.7071068,0> DIRECTION=CCW USE_PIN=NO REPORT VEC=<0.6532815,0.2705981,0.7071068> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/POINT,NORMAL,<6.0827,0.7677,0.5000> MODE/MANUAL COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, Position stylus at top center of front right hole (level with surface) PNT2 =FEAT/POINT,CARTESIAN THEO/<6.0827,0.7677,0>,<0,0,1> ACTL/<6.0827,0.7581,0.0513>,<0,0,1> READPOINT/ ALIGN2 =ALIGNMENT/START,RECALL:ALIGN1,LIST=YES ALIGNMENT/TRANS,XAXIS,PNT2 ALIGNMENT/TRANS,YAXIS,PNT2 ALIGNMENT/TRANS_OFFSET,XAXIS,-6.0827 ALIGNMENT/TRANS_OFFSET,YAXIS,-0.7677 ALIGNMENT/END MODE/DCC CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<6.0827,0.7677,0>,<0,0,1>,0.5906 ACTL/<6.0705,0.7569,0>,<0,0,1>,0.5953 TARG/<6.0827,0.7677,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW USE_PIN=NO REPORT VEC=<0.6532815,0.2705981,0.7071068> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO ALIGN3 =ALIGNMENT/START,RECALL:ALIGN2,LIST=YES ALIGNMENT/BF2D,ZPLUS,LEAST_SQR,CREATE WEIGHTS=NO,ROTANDTRANS,USE SCALING=NO,0,0,0,359.9784 ITERATEANDREPIERCECAD=NO Deviation Threshold=0.0003937 SHOWALLINPUTS=NO,SHOWALLPARAMS=NO ALIGNMENT/END
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, Position stylus at top center of front left hole (level with surface) PNT1 =FEAT/POINT,CARTESIAN THEO/<3.6811,0.7677,0>,<0,0,1> ACTL/<26.6234,19.2428,-78.9025>,<0,0,1> READPOINT/ ALIGN1 =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/TRANS,XAXIS,PNT1 ALIGNMENT/TRANS,YAXIS,PNT1 ALIGNMENT/TRANS,ZAXIS,PNT1 ALIGNMENT/TRANS_OFFSET,XAXIS,-3.6811 ALIGNMENT/TRANS_OFFSET,YAXIS,-0.7677 ALIGNMENT/END MODE/DCC CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<3.6811,0.7677,0>,<0,0,1>,0.5906 ACTL/<3.6745,0.7667,0.0301>,<0,0,1>,0.5955 TARG/<3.6811,0.7677,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<0.7071068,-0.7071068,0> DIRECTION=CCW USE_PIN=NO REPORT VEC=<0.6532815,0.2705981,0.7071068> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/POINT,NORMAL,<6.0827,0.7677,0.5000> MODE/MANUAL COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, Position stylus at top center of front right hole (level with surface) PNT2 =FEAT/POINT,CARTESIAN THEO/<6.0827,0.7677,0>,<0,0,1> ACTL/<6.0827,0.7581,0.0513>,<0,0,1> READPOINT/ ALIGN2 =ALIGNMENT/START,RECALL:ALIGN1,LIST=YES ALIGNMENT/TRANS,XAXIS,PNT2 ALIGNMENT/TRANS,YAXIS,PNT2 ALIGNMENT/TRANS_OFFSET,XAXIS,-6.0827 ALIGNMENT/TRANS_OFFSET,YAXIS,-0.7677 ALIGNMENT/END MODE/DCC CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<6.0827,0.7677,0>,<0,0,1>,0.5906 ACTL/<6.0705,0.7569,0>,<0,0,1>,0.5953 TARG/<6.0827,0.7677,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW USE_PIN=NO REPORT VEC=<0.6532815,0.2705981,0.7071068> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO ALIGN3 =ALIGNMENT/START,RECALL:ALIGN2,LIST=YES ALIGNMENT/BF2D,ZPLUS,LEAST_SQR,CREATE WEIGHTS=NO,ROTANDTRANS,USE SCALING=NO,0,0,0,359.9784 ITERATEANDREPIERCECAD=NO Deviation Threshold=0.0003937 SHOWALLINPUTS=NO,SHOWALLPARAMS=NO ALIGNMENT/END
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |