How to create gage ball in-between two perpendicular lines

MOVE/CLEARPLANE
CON1       =FEAT/CONTACT/CONE/DEFAULT,CARTESIAN,IN
            THEO/<0,0,1.513>,<0,0,1>,96,-0.162,2.188
            ACTL/<0.0297,0.0349,1.5511>,<-0.0232908,-0.0257488,0.9993971>,96.2932,-0.2184,2.2912
            TARG/<0,0,PLN3.Z>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=8,NUMLEVELS=3,DEPTH=0.03,END OFFSET=0.03
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              AVOIDANCE MOVE=NO,DISTANCE=5
              ONERROR=NO,READ POS=NO
            SHOW HITS=NO
            WORKPLANE/YMINUS
            ASSIGN/V2=DEG2RAD(CON1.A/2)
            ASSIGN/V3=(COS(V2)*1.495)*2
            ASSIGN/V4=(SIN(V2)*1.495)+1.495
CIR3       =FEAT/CIRCLE,CARTESIAN,IN,YES
            THEO/<0,0,1.431>,<0,0,1>,1.995
            ACTL/<0.0322,0.0377,1.441>,<-0.0232908,-0.0257488,0.9993971>,1.995
            CONSTR/CIRCLE,CONE,CON1,DIAMETER,V3
            ASSIGN/V5=V4+CIR3.Z
3MM_BALL   =GENERIC/POINT,DEPENDENT,CARTESIAN,$
            NOM/XYZ,<0+0,0+0,4.046+0>,$
            MEAS/XYZ,<0+0,0+0,V5>,$
            NOM/IJK,<0+0,0+0,1+0>,$
            MEAS/IJK,<0+0,0+0,1+0>