This is one of those really niche tips that might help out one maybe two people but I thought it was quite cool. When using the CAD graphs for surface profiles it has always bugged me that they stay active resulting in a messy report after several dimensions. I have found a way to capture the CADGRAPH, display it on the report and then turn it off again afterwards before displaying the next feature
[COLOR=#EE82EE]ASSIGN/COUNT=0[/COLOR]
SCN1START =LABEL/
[COLOR=#EE82EE]IF/COUNT==0
ASSIGN/[/COLOR][B][COLOR=#FF0000]TOGGLE[/COLOR][/B][COLOR=#EE82EE]="BOTH"
ASSIGN/[/COLOR][B][COLOR=#008000]SWITCH[/COLOR][/B][COLOR=#EE82EE]="BOTH"
END_IF/[/COLOR]
[COLOR=#0000FF] IF/COUNT==1
ASSIGN/[/COLOR][B][COLOR=#FF0000]TOGGLE[/COLOR][/B][COLOR=#0000FF]="OFF"[/COLOR]
[COLOR=#0000CD]ASSIGN/[/COLOR][B][COLOR=#008000]SWITCH[/COLOR][/B][COLOR=#0000FF]="NONE"
END_IF/[/COLOR]
SCN1 =FEAT/SET,CARTESIAN
THEO/<21.723,21.584,2.446>,<0,0,1>
ACTL/<21.677,21.586,2.247>,<0,0,1>
CONSTR/SET,BASIC,P8--(1),P9--(1),P10--(1),P11--(1),P12--(1),P13--(1),,
FCFPROF1 =SURFACE PROFILE : SCN1
FEATCTRLFRAME/SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=[B][SIZE=14px][COLOR=#FF0000]TOGGLE[/COLOR][/SIZE][/B],REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=[SIZE=14px][B][COLOR=#008000]SWITCH[/COLOR][/B][/SIZE],UNITS=MM
COMPOSITE=NO,
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
PRIMARY DIMENSION/PROFILE OF SURFACE,1,UNEQUAL TOLERANCE ZONE,0.7,A1,<dat>,<dat>
NOTE/FCFPROF1
FEATURES/SCN1,,
COMMENT/REPT,
SCNVIEW1 =VIEWSET/
RECALL/VIEWSET,SCNVIEW1
[COLOR=#EE82EE]IF/COUNT==0
DISPLAY/METAFILE, "", TO FIT, GOOD
END_IF/[/COLOR]
[COLOR=#0000FF]IF/COUNT==0
ASSIGN/COUNT=COUNT+1
GOTO/SCN1START
END_IF/[/COLOR]
This allows you to use CADGRAPH and end up with a clean and crisp report that only shows one profile on each screen capture.
Warning: I use this in a program that has 84 surface profile callouts, while it works perfectly it does dramatically increase saving and loading time.
