hexagon logo
Register Sign in
  • Replies 17 replies
  • Subscribers 10 subscribers
  • Views 420 views
  • Users 0 members are here
Options
Related

Basic Instruction

RussL
We have never used Datapage at all here, we do have licenses for it,
I opened it, browsed through some threads here....
I am looking for some basic instruction on how it works/ how to use it.
I am assuming I have to place a command in the PC D-MIS program to
export data to datapage, if so, perhaps someone can let me know the command to use.
I suppose I can do some SPC graphs/charts after more than one part is run.
But how do I fake running parts.
We only have licenses on the CMM PC's (no off-line).
How do I simulate running say ten parts with varying measured values
so I can check out how datapage works?
Parents
  • We have never used Datapage at all here, we do have licenses for it,
    I opened it, browsed through some threads here....
    I am looking for some basic instruction on how it works/ how to use it.
    I am assuming I have to place a command in the PC D-MIS program to
    export data to datapage, if so, perhaps someone can let me know the command to use.
    I suppose I can do some SPC graphs/charts after more than one part is run.
    But how do I fake running parts.
    We only have licenses on the CMM PC's (no off-line).
    How do I simulate running say ten parts with varying measured values
    so I can check out how datapage works?


    Here is what you can do to generate some playdata for learning with:

    Open pc-dmis and select "open" from the drop down menu
    Navigate to and select the program you want to open,
    Before you press the enter key look just below the selection windows, you will see another small selection window that says "CMM1" use the down arrow and choose "offline" press enter

    Now you can run the program any number of times. The CMM will not move, but the program will export data as it were a real run.

    If you need more help doing this, send me a PM (Private Message)

    HTH
Reply
  • We have never used Datapage at all here, we do have licenses for it,
    I opened it, browsed through some threads here....
    I am looking for some basic instruction on how it works/ how to use it.
    I am assuming I have to place a command in the PC D-MIS program to
    export data to datapage, if so, perhaps someone can let me know the command to use.
    I suppose I can do some SPC graphs/charts after more than one part is run.
    But how do I fake running parts.
    We only have licenses on the CMM PC's (no off-line).
    How do I simulate running say ten parts with varying measured values
    so I can check out how datapage works?


    Here is what you can do to generate some playdata for learning with:

    Open pc-dmis and select "open" from the drop down menu
    Navigate to and select the program you want to open,
    Before you press the enter key look just below the selection windows, you will see another small selection window that says "CMM1" use the down arrow and choose "offline" press enter

    Now you can run the program any number of times. The CMM will not move, but the program will export data as it were a real run.

    If you need more help doing this, send me a PM (Private Message)

    HTH
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement