Defined Contents K00xx

The field contents at value level (K00xx).

K0002 Attribut

K0004 Date / Time

Date and time can be written in different notations. All the different notations can be found in the Q-DAS ASCII Transfer Format.

The most common format is as an example: 

15.02.2024/07:46:31

DD.MM.YYYY/HH:MM:SS

Explanation:

 DD => Day

MM => Month

YYYY => Year (four digits)

 HH => Hours

MM => Minutes

SS => Seconds

The most important information, however, is that this is the written format and not the display in the software. The display in the software depends on the date/time setting of the operating system or, if activated, on the displayed language.

K0015 Reason for test

K0080/81 Subgroup ID/Value position in subgroup

K0080 is the clear subgroup identification which is the same for all measured values within the same subgroup.
K0081 is the position within the subgroup.

These two fields have a special status. They must not be offered to the user on the instrument for manual completion like normal additional data fields. When recording subgroups, the data acquisition software must indicate to the user which measurement within a subgroup they are currently measuring. K0080 receives the same entry for all measurements. The example shown here is the date_time (including milliseconds) of the start of the subgroup. The sequence number within the subgroup is written to K00081. Two samples of 3 are shown here as an example.