I'm using CENTCIR to find the location of the pin within my contour. I can find the center of the circle, but how can I evaluate the distance to the end of the pin?
Attached is a print snippet. How can I evaluate the 2.7753 and 1.5175 dimensions?
Hello Evaluate the distance from the upper planen to centerpoint and add half the center circle diameter. Evaluate the distance from the rigt plane to P2.
Hope this helps.
I was thinking there might be a command for this such as 3McdCirCir2, except one element would be an axis. There is a command MCDCIAX. but this is to the center of the circle.
Hello Evaluate the distance from the upper planen to centerpoint and add half the center circle diameter. Evaluate the distance from the rigt plane to P2.
Hope this helps.
I was thinking there might be a command for this such as 3McdCirCir2, except one element would be an axis. There is a command MCDCIAX. but this is to the center of the circle.
