hexagon logo
Register Sign in

Browse By Tags

  • manual retract for analog probing

    has anyone noticed the conflict when changing the analog manual probe retract in the F5 parameters menu in an inch program? it seems to go into a never ending arguement and i have to fight past an argument error and open a metric program and try to change…

  • Disk Calibration

    Hey all, it's been a little hectic with this disk probe and I don't know if you have came across this. My disk 18mm calibrates great but the diameter is off, I calibrate it with a ring gage and make the necessary edits until it reads the same as my ring…

  • PC-DMIS 2001 - Error when uploading a XYZ file

    Hi everyone, That's the first time i come on this forum. I have not a large experience in CMM. I am trying to make measurements of a blade with the old PC-DMIS 2001. There are like 350 points per face... I'm doing this to compare a physical blade…

  • Proven Program Erroring At Multiple Points

    We are running a program for a part (64mm x 64mm). We received a program from our customer and have correlated numbers after our adjustments (increasing clear planes for comfort, changing probes to what was available). The program was run smoothly for…

  • Error calculating deflection matrix

    Hi all. Fairly new to the forum. If someone could help, I would appreciate it. I am getting an "error calculating deflection matrix" when calibrating my 4x20 cylindrical probe. I have a TesaStar-SM using a Leitz scanning probe head. See attached >jpg…

  • Analysis in the customer report - problem

    Hello, I have a problem with the analysis. In the report does not analyze, but only the black square (see attached picture). I have a PC-DMIS 2013. Installed on two PC. At one everything is OK and the second is the error. Please, does anyone know…

  • Optics Calibration Error

    Hey everyone I am hoping I could get some help or maybe someone else has seen this error before. I have been having some problems with lighting adjustments during programming. The problem being the lighting percentage cannot go above 35%, when I try adjusted…

  • I can't turn off cmm

    I have an amplitude error coming up in PCDMIS and I read on here that turning the CMM on and off and letting it home itself might solve the issue. Problem is I don't know how to turn off CMM besides just the emergency stop button. It is a Brown & Sharpe…

  • Calibrating 20X Lens Focus Range Error HOW TO FIX?

    Hey guys, Today I have been trying to calibrate my 20X Nikon Lens. Specs: Machine: Optiv 2z763 PCDMIS: 2011 Probe: Mycrona_Fixed Optiv 20X 1/2 CCD ( Something Along These Lines ) This lens has not been built on our machine before…

  • HELP - TCP/IP Communication Failed????

    Receiving this error when i start up the software any help?

  • Trapping PC DMIS error or Capturing PC DMIS Error

    I would like to be able to trap/capture/copy any PC DMIS error that occurs while the program is running wituout interefering with the normal execution of PC DMIS, and without requiring operators to interact with PC DMIS to make it happen. I don't…

  • 2012 SP1 .net Framework 4 error

    I have found that you need to load the extended version of .net Framework 4 rather than the client version. The file name that worked for me is "dotNetFx40_Full_x86_x64.exe" from the Microsoft site rather than "dotNetFx40_Client_setup.exe". The 2012 software…

  • HELP! Database error -19-

    I am scanning airfoil sections on a turbine blade and i have run into a puzzling issue. I am using bladerunner and i can get my program to run with no problem. However, when it goes to blade to analyze it, the error comes up "Database error -19-" then…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement