hexagon logo
Register Sign in

Browse By Tags

  • Symmetry

    Hello. I am trying to evaluate the symmetry of 2 holes to a cylinder (datum A). I have created a point at each hole with COLPTS and then created a midpoint with SYMPNT. I believe I now need 2 constructed planes or axes, offset equally from the cylinder…

  • Error message

    Hi guys, I'm new to Quindos with very little experience. I need to output a squareness measurement. It's datum is a cylinder and I need to measure how square a plane is to this datum cylinder. I have tried using SQRAXAX and SQRCYPL but when…

  • Attach UDB to database pane

    Hi, I have t use some customer´s PRCs to run their own programs, how can I attach permanently the UDB to the database pane? Thank you!

  • External import

    Hi all, any help would be grateful. I am using the cmm running Quindos 7 to find a discrete point in space for x,y,z coordinates while touching onto a pressure gauge. At the point of maximum pressure I would like quindos to read from the gauge and import…

  • ANSI Y14.5 dimensioning in Quindos

    Hi, Just took this week Quindos basic training, I will be using ANSI Standard to inspect parts, how do I change from ISO 1101 to Y14.5M? Thanks for your help.

  • PRS_SaveDoc / Adding PRC to SDB

    Hello. I am running Q7, one version last updated 2011, the other in 2017. The newer version has the PRS_SaveDoc command, which I find is the best way to output PDF and the standard command I want to use on both CMMs. I am trying to "install" the PRS_SaveDoc…

  • CAD Transformation

    Good morning, I am learning how to use Quindos on my own. I am able to bring in the CAD model but how do you transform it? Also, can you program off-line with Quindos?

  • Intersection Sph - Pla

    Hi . How can I build a circle between a sphere and a plane? Thank you

  • Increase decimal places on Quindos report.

    Hello. I simply want to report the evaluations to 5 decimal places. I am able to evaluate to 5 places, but the report will only show 3. Anyone have any idea how to change this? Thanks.

  • input box

    How to create an input box for operator to to put some number from keyboard? I would like to assign that number to variable.

  • Creating a plane with 3 measurement features

    Sorry for my question. I have measured three spheres. Now i need to know, how can i create a plane with this three spheres

  • Minimize/ Delete Infos in StandardReportLayout in PageDesigner

    Hello, how can i delete some infos / rows in the pagedesigner. I will minimize the infos which will printed in the header of the report. Also i will delete some infos which will be filled by the operator Deutsch: Mir sind zu viele Infos im…

  • Create a Button on the MainCmd$Tree

    Hello there, Can somebody help me to create a Button on the MainCmd$Tree? I don't know how to create one and insert it into the tree. bg Benjir0

  • Qualify long/thin probes on Global S

    I'm setting up several project part programs here in Vietnam which was running on a ZEISS CMM with Q7 back home before. I have big problems with long/thin probes, for example 3.5mm ball, 2mm shaft and around 100mm long. Calibration itself is working…

  • Quindos Training Class

    Anybody been to the Level 1 Quindos training class? I am scheduled to go to RI in March. Just looking for some input as to how it went. Thanks.

  • Importing Data into Quindos 7

    Can text and numbers be imported to Quindos 7 from MS Access and/or Excel? I have an Access database containing information about a lot of parts. Currently, I have to manually access the database and write the info down that I need and manually enter…

  • // Parallelism in two different views

    I know I've done this in the past, but rarely use it. Is there a way of looking at parallelism of two planes from two different views? When I enter .$YZ, .$ZX, or nothing at all in the direction box, i get the same exact result.? Maybe that's what I should…

  • Finding spline issue

    Hello. Using Quindos 7 with gear pack. I am trying to fix a recurring issue with an existing program. The part is a cylinder with a flange at one end, the flange is comprised of four pads, each with a hole through. The cylinder has an internal…

  • Problems with some mathematical formulas (DE/EN)

    Hallo liebe Leute, ich hätte da eine Frage zu meiner Zeichnung / Skizze, die ich diesem Post angehängt habe. Um die Zeichnung / Skizze einmal zu erklären, ich habe 4 Kreise und muss mit den 4 Kreisen den / die Winkel eines / mehrere Kreisbogen berechnen…

  • Circle between tangents

    How can I put circle between two axis (tangents) about specific radius?

  • Fatal Error / Licence issue

    Hey. Quindos 7. I came in this morning and our Leitz is throwing up a fatal error when loading the standard machine environment. The GDB appears to be corrupted somehow. I spoke to Hexagon support, they have told me to start a new environment from…

  • Output Report as .csv

    Hello I need to get reports out of Quindos 7 in, preferably, .csv format (.nrp/.txt/.xml might do), can anyone point me in the right direction. I am a Quindos noob so go easy. Cheers.

  • Scan Offset Force LSP-S2

    All, I currently run PC-DMIS and have the ability to control my scan offset force. I was told by a Quindos user with the same head that they cannot change that value. I do believe you can, if so, how do I tell them to change it? Thanks!!

  • Clipping data points

    I am very new to using Quindos, and there was definitely a steep learning curve. I am currently running an old Leitz PMM 544 that upgraded back in 2006 to include the B4 Controller, and has an LSP-S1 Probe head. My issue that I am encountering is…

  • Evaluate

    How can I put infinity in evaluate higher tolerance. My dimension in the drawing has only a lower limit.
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement