hexagon logo
Register Sign in

Browse By Tags

  • Excel Form Report-Bonus

    Does anyone know a way to add the bonus column to an excel form report?

  • Exact measure datum shift error

    I have come across another issue that im having with exact measure ( i have not tried this on "geometric tolerance command" yet). The problem i am having is the datum shift when applied thru simultaneous evaluation (s.e.) is making erroneous datum shifts…

  • Reporting Bonus Tolerance

    Hey all, Does anyone know if there is a way to automatically add the bonus tolerance of a position onto the tolerance on the report. It would help out inspectors if the total tolerance was displayed. I don't get why it calculates the total for a position…

  • Bonus is not calculating

    Currently i am using pcdmis 2019 cad++ when i do the position of certain features it is not calculating bonus to the position feature, when i refresh that fcloc then close the program and reopen that it is calculated but position values changes automatically…

  • True Position Out of Tolerance

    ​ Hello, I am having trouble understanding how this TP callout can be out by so much. I attached a pic of what the report looks like and the code is shown below. Does anybody have any ideas? I have tried redoing the alignment but that did not…

  • Assigning/Extracting Measured Positions (XACT)

    Where I work I very frequently have position dimensions called out in sets. When the DRF is not fully constrained, or when there are MMB modifiers on datums, its critical to call the holes out as sets so any Datum Shift is the same for all the holes in…

  • GD&T Settings Resetting to Default After Execution (True Position)

    All of my FAIRs and FIRs are bubbled such that the True Position and Size are two different bubbles and require two different labeled dimensional readouts on my reports; thus, I make separate dimensions for size (diameter in this case) and true position…

  • GD&T Report Font Issues

    I recently ran into an issue when reviewing reports that shows the following for a true position measurement in a CAD view: I did some digging on both of our CMM stations thinking that one of them may have an oddball setting or a corrupt font…

  • Remove datum shift and summary from TP report

    I'm reporting the true position of a single diameter. My report shows the following boxes: FCFLOC1 Size FCFLOC1 Position FCFLOC1 Datum Shift FCFLOC1 Summary FIT TO DATUMS = ON, DEV PERPEN CENTERLINE = ON I don't really want to see the bottom…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement