I recently had an issue with the fsae database I was using that just wouldn't load, but that issue was fixed with Rishi's help ( simcompanion.hexagon.com/.../ive-been-following-the-adm743-fsae-tutorial-and-while-completing-workshop2part2-simulating-a-full-vehicle-assembly-i-get-an-error-in-the-message-window-stating-the-model-isnt-defined-so-where-and-when-do-i-need-to-define-the-model ).
This was my new start point, but when I modified the hard points of the front suspension subsystem it lost most/all of its links with the property files? Here's what I did:
- Created a new subsystem, using the template _fsae_frontsusp.
- Modified the hard points to reflect the teams current car setup, placing the zero reference on the ground with y=0 and x=0, which is the xy coord of the CoG, and all dimentions taken from there.
- Applied the changes and looked at the graphical representation (looked good).
- Saved the subsystem and got a huge list of property file warnings (attached)?
- Did the same for the ARB and steering and got similar issues.
- Created a new assembly with the front susp, arb and steering, got some more property wanings.
- Tried to run a front suspension assembly simulation, but unsurprisingly it wouldn't run.
It looks similar to the above problem in that all of the property files are a lot older (2012/2013)?
I'm not sure why this would happen? Am I missing a step?
Warren
Attached Files (1)
