Is there any easier way of making tire blow out simulation?

Hi,

I am trying to run a tire blow out simulation. I made some research and it seems the easiest way to use Ftire with inflation pressure around 0 bars.

I got an ftire data with pressures with the tire tests were performed at 8.5 and 10 bars.

I would like to get your opinions about making the analyses with the extrapolation form 8.5 to 10 bars to 0 bars inflation pressures would be realistic or not.

During my research I couldn't find any study with Adams in tire blow out analyses, have you seen any study on tire blow out analyses in Adams? Is there any easier way?

Regards,

Yahya,

Parents

0 yahya.oz over 6 years ago

Thank you Martin,

Adams documentation and cosin/tool documentation told me. I know I can modify every .tir document can be modified with my old friend notepad, but since both of these documents insists to use cosin/tool, I would like to ask.

Actually your suggestion didn't solve my problem. I deleted thelastpart including gibrish data at the end of document and  I made the following modification to operating conditions as stated in the Adams and cosin/tool documentation:

[OPERATING_CONDITIONS]

MODEL_LEVEL = 7

( TIME_TABLE_INFLATION_PRESSURE )

0    8.5                   $ bar

2    8.5                   $ bar

2.2  0.0                   $ bar

but it is still runnung without any blow out. Most probably I found a bug that time table doesn't work.

Did you get the graph in your documentation in quasi equilibrium. I need to change the inflation pressure in dynamic simulation. Can you showme the inflation pressure w.r.t. time graph?

I found "ctiSetInflationPressure" routine for Ftire. May be I can modify the pressure within Adams. But I need to find out how I can compile with this routine.

Thanks,

Yahya
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 yahya.oz over 6 years ago

Thank you Martin,

Adams documentation and cosin/tool documentation told me. I know I can modify every .tir document can be modified with my old friend notepad, but since both of these documents insists to use cosin/tool, I would like to ask.

Actually your suggestion didn't solve my problem. I deleted thelastpart including gibrish data at the end of document and  I made the following modification to operating conditions as stated in the Adams and cosin/tool documentation:

[OPERATING_CONDITIONS]

MODEL_LEVEL = 7

( TIME_TABLE_INFLATION_PRESSURE )

0    8.5                   $ bar

2    8.5                   $ bar

2.2  0.0                   $ bar

but it is still runnung without any blow out. Most probably I found a bug that time table doesn't work.

Did you get the graph in your documentation in quasi equilibrium. I need to change the inflation pressure in dynamic simulation. Can you showme the inflation pressure w.r.t. time graph?

I found "ctiSetInflationPressure" routine for Ftire. May be I can modify the pressure within Adams. But I need to find out how I can compile with this routine.

Thanks,

Yahya
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data