hexagon logo
Register Sign in
  • State Not Answered
  • Replies 4 replies
  • Subscribers 11 subscribers
  • Views 38 views
  • Users 0 members are here
Options
Related

ADAMS/Car - Control of the Initial Conditions

4ondrej.petergac
Hello,
 
In the ADAMS/Car after the simulation is submitted, then the initial condition simulation, static simulation and dynamic simulation are executed.
 
In my model there is a lot of variables which set during initial condition simulation.
 
I want to control in the ADAMS/Car if the initial conditions are set correctly.
 
Is there any way to control the values of the initial conditions.
 
Thanks
Ondrej
 
 
Parents
  • 0
    Have you tried right button + info? e.g:
    If you want to know the camber adjustment, you can run a paralell travel at zero displacement and when finished check camber adjustable force (as per above), this will tell you how much adjustment is being made and if it is being achieved or not. I recall there is an example of this in A2016 release, check for "Adams 2016 New Features Examples
    " in SimCompanion
     
Reply
  • 0
    Have you tried right button + info? e.g:
    If you want to know the camber adjustment, you can run a paralell travel at zero displacement and when finished check camber adjustable force (as per above), this will tell you how much adjustment is being made and if it is being achieved or not. I recall there is an example of this in A2016 release, check for "Adams 2016 New Features Examples
    " in SimCompanion
     
Children
No Data
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement