hexagon logo
Register Sign in
  • State Not Answered
  • Replies 11 replies
  • Subscribers 11 subscribers
  • Views 158 views
  • Users 0 members are here
Options
Related

Looking for a way to develop actuator displacement signals on an Adams rig capable of reproducing measured responses on a test (physical) vehicle. Any suggestions for tools or processes?

Stefano.Cassara
Looking for a way to develop actuator displacement signals on an Adams rig capable of reproducing measured responses on a test (physical) vehicle. Any suggestions for tools or processes?
Parents
  • 0
    Have a look at the general actuation_example assembly from the acar_shared.
    In a nutshell you can use rpc-files as an input for any of the channels which is basically what you wanted to do.
     
    Helpful commands:
    Adjust -> Acatuators -> Table (good overview on what's there)
    Adjust -> Acatuators -> Wizard (change input to rpc)
    Simulate -> General Actuation Analysis -> Actuation Input File -> Save/Open (Save/load your setting to/from a file)
    Simulate -> General Actuation Analysis -> Submit Analysis
Reply
  • 0
    Have a look at the general actuation_example assembly from the acar_shared.
    In a nutshell you can use rpc-files as an input for any of the channels which is basically what you wanted to do.
     
    Helpful commands:
    Adjust -> Acatuators -> Table (good overview on what's there)
    Adjust -> Acatuators -> Wizard (change input to rpc)
    Simulate -> General Actuation Analysis -> Actuation Input File -> Save/Open (Save/load your setting to/from a file)
    Simulate -> General Actuation Analysis -> Submit Analysis
Children
No Data
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement