hexagon logo
Register Sign in
  • State Not Answered
  • Replies 3 replies
  • Subscribers 11 subscribers
  • Views 79 views
  • Users 0 members are here
Options
Related

I am using Adams Machinery to model helical gears with 3D contact method, I am getting noise in the results when I compute forces at gear joints (revolute). Is there any way to avoid these noise in the result without application of filters.

skaka
I am using Adams Machinery to model helical gears with 3D contact method,
I am getting noise in the results when I compute forces at gear joints (revolute).
Is there any way to avoid these noise in the result without application of filters.
Parents
  • 0
    The surfaces of the gears is a meshed surface, which means that you cannot avoid the noise from the 3D contact. You can influence the noise by changing the mesh settings (number of profile points & number of layers).
    If you are not interested in the gear mesh error you can use the simplified gear force instead of the 3D contact. This will give you a smooth transition and still provide all resulting forces. Only the gear mesh error will be omitted.
Reply
  • 0
    The surfaces of the gears is a meshed surface, which means that you cannot avoid the noise from the 3D contact. You can influence the noise by changing the mesh settings (number of profile points & number of layers).
    If you are not interested in the gear mesh error you can use the simplified gear force instead of the 3D contact. This will give you a smooth transition and still provide all resulting forces. Only the gear mesh error will be omitted.
Children
No Data
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement