From console Output/log file:
# DIGIMAT ERROR : Composite_data Triax is invalid or undefined.
# DIGIMAT INFO : INPUT PROCESSOR ISSUED 1 ERROR AND 0 WARNING MESSAGES
# DIGIMAT ERROR : Digimat-MSC Nastran SOL400 stops because of errors.
MSC Nastran finished Fri Jul 14 11:05:55 CDT 2023
MSC Nastran job dogbone_digimatcoupled completed.
This is the error I keep getting in Digimat RP's Input/Output Portal
*** USER FATAL MESSAGE 7836 (digi2nastranSOL400)
PLEASE CHECK DIGIMAT MODEL MATERIAL AND LOG FILES, SCA.MDSolver.Util.Digimat TERMINATED WITH RETURN CODE 2000
What is shown above are fatal error messages from the .f06 file for a tensile test whenever I try to run it on Digimat RP coupled wit Patran/Nastran via MSC Nastran/SOL400. The issue I have is that tensile tests terminate abnormally despite if I put constrains on the Parasolid. Note this issue only occurs when I use MSC Nastran/SOL400 and not MSC Nastran/SOL1XX with Digimat RP. The Digimat object is tensile test Parasolid imported from Patran as a .bdf file. This issue occurs whether I am using an elastic or elastoplastic material and whether or not I apply a constraint on the Parasolid in Patran. Can anyone help to resolve this issue?
