下記ERRORの対処方法を具体的に教えてください。

kawashima.masaki1.3044481651999531E12 over 6 years ago

*** USER FATAL MESSAGE 1221 (GALLOC) THE PARTITION OF THE SCRATCH DBSET USED FOR DMAP-SCRATCH DATABLOCKS IS FULL. USER INFORMATION: THE DMAP SCRATCH PARTITION WILL NOT SPILL INTO THE 300-SCRATCH PARTITION. USER ACTION: 1. SET NASTRAN SYSTEM(151)=1, OR 2. INCREASE THE NUMBER OF MEMBERS, AND/OR THEIR MAXIMUM SIZE, FOR THE SCRATCH DBSET ON THE "INIT" STATEMENT. BIOMSG: ERROR 4276 HAS OCCURRED IN ROUTINE GALLOC , FILE INDEX = 0. STATUS = 0

Attached Files (1)

A1_Stru_GAP_Case03.dat

0 Vivek Bhardwaj over 6 years ago

Try on command line:

SSCR=1000GB SDBALL=1000GB
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kawashima.masaki1.3044481651999531E12 over 6 years ago

I am not sure "command line". Could you please teach me it concretely? Thank you.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Vivek Bhardwaj over 6 years ago

When you double click on to Nastran icon on windows machine, after selecting the input file , another option is visible, which is having optional keywords, there you need to enter the SSCR=1000GB SDBALL=1000Gb, see below image:
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Vivek Bhardwaj over 6 years ago
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kawashima.masaki1.3044481651999531E12 over 6 years ago

I already tried it, and I got the below fatal error. Could you please teach me what I should do?

  NASTRAN BUFFSIZE=8193 $(C:/MSC.SOFTWARE/MSC_NASTRAN/20122/CONF/NAST20122.RCF[2])

    NASTRAN REAL=2144075776 $(PROGRAM DEFAULT)

    $********* PSOLID DEFINITIONS

    INIT MASTER(S)

    NASTRAN SYSTEM(442)=-1,SYSTEM(319)=1

*** USER FATAL MESSAGE 1257 (DBMAP)

    THE MAX-SIZE SPECIFIED ON THE INIT FMS STATEMENT OR SMEM VALUE IN THE RC FILE OR SMEM

    KEYWORD IN THE COMMAND PROCEDURE FOR THE MEMFILE OF DBSET SCRATCH IS 100 BLOCKS

    AND IS LESS THAN THE RECOMMENDED MINIMUM OF 254 BLOCKS.

    USER ACTION: SPECIFY A MAX-SIZE OR SMEM VALUE AT OR ABOVE THE RECOMMENDED VALUE.

0FATAL ERROR

Thank you,

Masaki
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Vivek Bhardwaj over 6 years ago

Try with SMEM=2GB if still does not work, send request to support at :

mscnastran.support@mscsoftware.com

Also please send the f04, log and f06 files
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kawashima.masaki1.3044481651999531E12 over 6 years ago

Thank you very much for your great advaice. I got analysis result.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel