hexagon logo
Register Sign in
  • State Not Answered
  • Replies 13 replies
  • Subscribers 4 subscribers
  • Views 121 views
  • Users 0 members are here
Options
Related

Combine a sol106 static solution with a static thermal subcase.

derek.lewis
I have flexure that I am using a solution 106 to deflect part of the flexure with an SPCD in steps up to full pre-load. From this pre-loaded state, I would like to add a thermal soak on the pre-loaded flexure from this last load step. There are four thermal cases I wanted to consider to combine with the last static load step, if that is possible.
Parents
  • 0
    But if you want to only start from the end of the preload, and pick up with a new temp loading condition, you would have to do a RESTART. You run the first SOL106 up to the end of the preload, and keep the resulting Master/DBALL/IFPDAT files, and then you can restart of that solution into a new loading condition... you would run as many separate restart runs as there are separate thermal load cases. Of course, if you want to go from the end condition of one thermal loading into the next thermal loading, RESTART is not needed... just stack the subcases in the order you want the loading to progress.
     
    I'll attach a simple read-only restart example.
     
    Attached Files (1)
Reply
  • 0
    But if you want to only start from the end of the preload, and pick up with a new temp loading condition, you would have to do a RESTART. You run the first SOL106 up to the end of the preload, and keep the resulting Master/DBALL/IFPDAT files, and then you can restart of that solution into a new loading condition... you would run as many separate restart runs as there are separate thermal load cases. Of course, if you want to go from the end condition of one thermal loading into the next thermal loading, RESTART is not needed... just stack the subcases in the order you want the loading to progress.
     
    I'll attach a simple read-only restart example.
     
    Attached Files (1)
Children
No Data
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement