hexagon logo

USER FATAL MESSAGE 1250 (BIOWRT) No space left on device (errno = 28)

 *** USER FATAL MESSAGE 1250 (BIOWRT)
   STATUS =      28, FILX =  5, LOGNAME = SCR300 , NSBUF3 =  65536
   FILE = /scratch/system/D200131_XLR-KB_FE_DFEM_MODEL_MR_v5.T8595_10.SCR300
   BLKNBR =   573571
   ERROR MESSAGE IS --
   No space left on device (errno = 28)
   BIOMSG: ERROR  1039 HAS OCCURRED IN ROUTINE BP_BIO , FILE INDEX =      5.
   LOGICAL NAME IS SCR300 
 
 *** SYSTEM FATAL MESSAGE 4276 (BP_BIO)
   ERROR CODE   1039 PID=  0
 *** USER INFORMATION MESSAGE 4276 (BP_BIO)
   THE DIAG 44 RELATED A NASTRAN DUMP IS SENT TO LOG FILE.
   USER ACTION: THIS INFORMATION MAY BE USEFUL TO MSC FOR DEBUGGING YOUR PROBLEM.
         PLEASE CONTACT MSC CLIENT SUPPORT.
Parents
  • There are modeling issues with your RBE elements. This makes the solver running in loop and finally running out of space with rigid=linear or with rigid=lagr its gives a more appropriate error message.
     
    I would suggest fixing all the issues with the RBE elements. Job will not run until we fix these issues.
     
    Now you already have all the nodes in the error message which are creating violations. Also your pre-processor might have some tools to model check the RBE's.
     
    In Nastran we have FEMCHECK=ALL in case control. Please refer QRG for more information on it.
Reply
  • There are modeling issues with your RBE elements. This makes the solver running in loop and finally running out of space with rigid=linear or with rigid=lagr its gives a more appropriate error message.
     
    I would suggest fixing all the issues with the RBE elements. Job will not run until we fix these issues.
     
    Now you already have all the nodes in the error message which are creating violations. Also your pre-processor might have some tools to model check the RBE's.
     
    In Nastran we have FEMCHECK=ALL in case control. Please refer QRG for more information on it.
Children
No Data