PC-DMIS 2023.2 Service Pack 14 is available for download -
PC-DMIS 2023.2 Service Pack 14 Download
Application
You can now see that numerous application errors based on crash reports have been fixed, and protection for various exceptions (crashes) to improve product stability was added. See PCD-264482.
You can now see that PC-DMIS loads faster due to an improved DLL initialization process. See PCD-266555
Application Errors
You no longer get an application error when you save a measurement routine that includes Blade Section command. See PCD-265383
Constructed Extracted Feature
PC-DMIS no longer changes the Geometric Tolerance zone when you press F9 to edit a Cylinder or Cone feature and then you click the Close button in the Construct Cylinder or Construct Cone dialog box. See PCD-266609
DMIS
You can now see that the DMIS export and import for Constructed Extracted features is now updated using the =FEAT/OBJECT format. See PCD-257862
GD&T Dimensions
PC-DMIS now shows only the lower value of a Size dimension in a report when you use a single modifier (GX, GN, or GG), as the upper value is identical. See PCD-265674
Legacy Dimensions
PC-DMIS now shows the correct number sequence for the selected features in the Feature list area when you are creating distance dimension. See PCD-262068
Reporting
PC-DMIS now correctly displays the mesh colormap in the CAD Only report view. See PCD-259501
Tool Changer
You can now use the ASSIGN/RESERVED_TOOLCHANGE_SAFETY_MODE=1 command to activate the Tool Change Safety Mode. When this mode is active, PC-DMIS displays this message during tool change execution:
Toolchange. Drop [probeName] at slot [dropslot]. Pick [probeName] from slot [pickSlot].
Click Ok to continue execution
To cancel, click Cancel. See PCD-268198.
PC-DMIS now ensures that if a probe change occurs when a tactile probe is dropped off and another tactile probe is picked up while a laser probe is in the tool changer, the laser probe's presence is verfiied through its proximity sensor before continuing with the probe change. See PCD-267126.