Anybody use the equator gauging system? Whats everyones thoughts on this type of equipment, how well does it work and what types of parts is this best used on? Doesnt sound like it will give you measurments from cad models and only compares to a master part.
Some info from the website for those of you browsing:
System features
Working volume XY Ø300 mm
Z 150 mm
Comparison uncertainty* ±0.002 mm
Scanning rate 1000 points/s
Fixturing requirement ±1 mm
Air supply requirement No air required
Some info from the website for those of you browsing:
System features
Working volume XY Ø300 mm
Z 150 mm
Comparison uncertainty* ±0.002 mm
Scanning rate 1000 points/s
Fixturing requirement ±1 mm
Air supply requirement No air required
