hexagon logo

Looking for dynamic way to load/offload the CMM's with heavy fixtures and other ideas

We are currently in the process of putting together a plan to move my metrology lab. Does anyone have any suggestions on what to use to load and offload the heavy fixture's (1000 lbs) we use on the CMM's. Currently we use a hi-lo, but i would like to avoid that if possible, We would also like to avoid having an over head crane.

Any other ideas on making a dynamic metrology lab would be greatly apprcieated.

Thanks,
Scott Hoogerhyde
Parents


  • +1 if you go into products on John's web site he posted you will see the one we use.

    C22 – Basic Series DC Counterbalanced Stacker

    2,200lb capacity model


    A excellent value priced alternative to a sit-down forklift.

    • 24 volt Curtis SepEx transistor control

    • High torque DC drive motor

    • Lift and lower buttons in handle

    • Forward and back tilt for accurate positioning of loads

    • High visibility I-beam mast

    • Off-set drive wheel and casters provide for easy steering

    • Ergonomic handle with safety reversing switch and horn

    • Industrial battery with external charger

    • Battery discharge indicator with hour meter

    • ITA Class II fork carriage
Reply


  • +1 if you go into products on John's web site he posted you will see the one we use.

    C22 – Basic Series DC Counterbalanced Stacker

    2,200lb capacity model


    A excellent value priced alternative to a sit-down forklift.

    • 24 volt Curtis SepEx transistor control

    • High torque DC drive motor

    • Lift and lower buttons in handle

    • Forward and back tilt for accurate positioning of loads

    • High visibility I-beam mast

    • Off-set drive wheel and casters provide for easy steering

    • Ergonomic handle with safety reversing switch and horn

    • Industrial battery with external charger

    • Battery discharge indicator with hour meter

    • ITA Class II fork carriage
Children
No Data