BASIC DIMENSIONS USE G D &T TOLERANCING, THE QUESTION IS I HAVE BASIC DIMENSIONS COMING FROM X & Y AXIS. AM I SUPPOSED TO "CUT" THE TOLERANCE IN HALF WHEN DIMENSIONING THE BASIC DIMENSION? example X AND Y ARE BOTH [2.077] THE TRUE POSITION CALLOUT IS ALLOWING UP TO .015 SHOULD I USE .0075 FOR X AND .0075 FOR MY Y TOLERANCE?
What the f**k are you talking about. c^2=a^2+b^2 is same as sin^2(angle)+cos^2(angle)=1
EDITED TEXT: And trigonometry comes from Greek words trigonom(triangle)+metron(measure). Which means if you are calculating relationship of sides and angles of a triangle you are doing trigonometry.
The basic function: a^2+b^2 =c^2 is an algebraic function. It is not implicitly trigonometry. It is the
foundation of trig, but is not, by itself, trig.
What the f**k are you talking about. c^2=a^2+b^2 is same as sin^2(angle)+cos^2(angle)=1
EDITED TEXT: And trigonometry comes from Greek words trigonom(triangle)+metron(measure). Which means if you are calculating relationship of sides and angles of a triangle you are doing trigonometry.
The basic function: a^2+b^2 =c^2 is an algebraic function. It is not implicitly trigonometry. It is the
foundation of trig, but is not, by itself, trig.
