We have a Global Advantage DCC machine with PC DMIS 2011, and H00008 Universal Jogbox, I calibrated the probe as usual, after it went through the calibration routine, the stick went dead, I could not get the machine to move manually no matter what I tried, So I tried doing some DCC moves and it worked! I then shut off and restarted everything but still, the jogbox will not move the machine, has anyone out there had this or a similar problem?? Please help.
PS No damage to machine or jogbox, it just stopped working manually
Is the light above the probe blinking? Yesterday my module went bad and it was moving intermittently and acting very strange. It would work in DCC sometimes, but manual was nutty.
Is the light above the probe blinking? Yesterday my module went bad and it was moving intermittently and acting very strange. It would work in DCC sometimes, but manual was nutty.