Does anyone here have any experience transitioning to a CAD only or a CAD + limited 2D drawing approach?
Tangentially: from a process capability viewpoint - True Position is essentially a go/no go attribute check but variable data is needed to establish and track capability which is all well and good, just insist the BASIC dimensions are reported. . . but what about tolerance? You need a tolerance for those basic dimension to perform full function SPC analysis. Do you calculate the largest square that fit in the circle and use 1/2 of that size as ± for the BASIC or what?
Fortunately, most of my 0 at MMC are on Datum B and C, which is hilarious on a stamping. Datum B is always 0, and Datum C rotation is always... 0. Meh.
