Your Products have been synced, click here to refresh
4.1 Fundamental Rules
(s) Unless otherwise specified, elements of a surface include surface texture and flaws (e.g. burrs and scratches). All elements of a surface shall be within the applicable specified tolerance zone boundaries.
7.11.2 Irregularities on Datum Features Applicable RMB
If irregularities on a datum feature are such that the part is unstable (i.e. it rocks) when it is brought into contact with the corresponding true geometric counterpart, the default requirement is that the part be adjusted to a single solution that minimizes the separation between the feature and the true geometric counterpart per ASME Y14.5.1M. If a different procedure is desired (candidate datum set, Chebychev, least squares, translational least squares, etc.), it shall be specified.
4.1 Fundamental Rules
(s) Unless otherwise specified, elements of a surface include surface texture and flaws (e.g. burrs and scratches). All elements of a surface shall be within the applicable specified tolerance zone boundaries.
7.11.2 Irregularities on Datum Features Applicable RMB
If irregularities on a datum feature are such that the part is unstable (i.e. it rocks) when it is brought into contact with the corresponding true geometric counterpart, the default requirement is that the part be adjusted to a single solution that minimizes the separation between the feature and the true geometric counterpart per ASME Y14.5.1M. If a different procedure is desired (candidate datum set, Chebychev, least squares, translational least squares, etc.), it shall be specified.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |